Hotpoint CH60DTXF S Mode d'emploi Page 36

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 44
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 35
36
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
CARE AND CLEANING
The outside of the cooker should be cleaned regularly to keep it looking like new. Wipe
over with a soft cloth wrung out in warm water and dry with a soft clean cloth. You can use
mild non abrasive cleaners but always read the manufacturer’s instructions first. Always
test their suitability on a small area of the cooker not noticeable in normal use.
NOTE: DO NOT use scouring pads or abrasive cleaners as they may scratch the
surface.
Wear protective gloves when cleaning any part of your cooker.
Door and Control Panel (Glass)
Regularly wipe with a clean, damp cloth and polish with a clean, dry cloth.
Door and Control Panel Trims (Stainless Steel)
Regularly wipe with a clean, damp cloth and polish with a clean, dry cloth.
Solar Plus Grill
To clean the solar plus grill, use a clean, damp, soapy cloth and wipe over. If stubborn
stains remain, gently clean with a well soaped nylon scouring pad and wipe over with a
damp cloth.
NOTE: DO NOT use metal cleaning utensils, wire wool or proprietary oven cleaners
on the grill element mesh.
WARNING: TO AVOID ELECTRIC SHOCK, BEFORE REPLACING THE OVEN LIGHT,
SWITCH THE COOKER OFF AT THE COOKER CONTROL UNIT (and
allow to cool if the oven has been used).
Replacement of the Oven Light
Unscrew the glass cover, using a suitable cloth to protect the fingers and remove carefully.
Unscrew the existing light bulb, and remove. Screw the new bulb into position and replace
the glass cover, with metal washer, until positioned securely.
Do not use the oven lamp as/for ambient lighting.
Vue de la page 35
1 2 ... 31 32 33 34 35 36 37 38 39 40 41 42 43 44

Commentaires sur ces manuels

Pas de commentaire