Hotpoint CM 7945 IX A Mode d'emploi Page 16

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 28
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 15
16
The appliance is factory-set to automatically deliver the following amounts of coffee:
Espresso,
Small cup,
Medium cup,
Large cup,
Mug.
To modify these quantities and set the amount of coffee desired, for example changing the amount of
espresso, proceed as follows:
Press the button (B4) repeatedly until the display shows ESPRESSO.
Keep the button (B8) pressed until the display shows the message PROGRAM QUANTITY.
Meantime the machines runs off coffee.
Press the button (B8) again to stop run-off and reprogram the machine with the new quantity of
coffee.
The machine is now reprogrammed with the new setting and is ready for use.
You can also modify the amount of coffee in a small cup, medium cup, large cup and mug.
N.B.: press button (B9) for a measure of coffee which is double that previously set using button (B8).
If you wish to return to the original machine settings, see paragraph Resetting factory default values (reset).
The coffee grinder is factory-set and does not require adjustment;
nonetheless, if run-off is too fast or too slow (coffee drips out), carry out
an adjustment using the grinding coarseness adjustment knob (Figure
14).
The adjustment knob must only be
turned while the grinder is in
operation.
For slower run-off and creamier coffee, turn the knob 1 click in an anti-
clockwise direction (= finer ground coffee).
For faster run-off (not in drips), turn the knob 1 click in a clockwise
direction (= coarser ground coffee).
WARNING:
Press button (B3) (Figure 8) and select the pre-ground coffee function.
Slide the machine out towards you; be sure to use the purpose-designed handles (Figure 7).
Lift the small central lid, pour one scoop of pre-ground coffee into the funnel (Figure 18); push the
machine back inside the housing and proceed as described in chapter MAKING COFFEE (USING
COFFEE BEANS).
N.B.: only one coffee at a time can be made, press button (B8) (Figure 12).
If, after operating the machine with pre-ground coffee, you want to revert to making coffee with
beans again, deactivate the pre-ground coffee function by pressing button (B3) (Figure 8) again.
N.B.:
Never add pre-ground coffee when the machine is switched off, as it could spread throughout the
inside.
Never add more than 1 scoop, otherwise the machine will not prepare the coffee.
Use only the scoop provided.
Only use pre-ground coffee for espresso coffee machines.
If you add more than one scoop of ground coffee and the funnel becomes blocked, carefully use a
knife to clear the coffee through the funnel (Figure 20), then remove and clean the brewing unit and
the machine as described in paragraph Cleaning the brewing unit.
Making espresso with pre-ground coffee (instead of beans)
Adjusting the coffee grinder
Changing the amount of coffee in the cup
Vue de la page 15
1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 27 28

Commentaires sur ces manuels

Pas de commentaire