Hotpoint CM HPC HB0 H Mode d'emploi télécharger pdf (Page 17)

hotpoint.eu

ALARM(S) MACHINE STATUS

Buttons light up in sequence

Lit

Espresso button ashing

Lungo button ashing

Flashing fast

Lit - xed light

(only espresso button )

Lit - xed light (only lungo button )

Flashing alternately

Reduced illumination

Flashing slowly

Machine is on and heating up.

Machine has reached correct temperature for coffee delivery.

Machine is making an espresso.

Settings for an espresso.

Machine is making a lungo.

Settings for a lungo.

Machine malfunctioning. Switch off and then on after 30 seconds.

If defect persists, contact Service Centre.

Machine shows descaling process was selected. So tank must

include descaling solution.

Machine shows rst step of descaling process is over. Rinse and

ll tank with fresh drinkable water.

Machine shows second step of descaling process is under way.

Machine is supplying water for circuit rinsing. Only lungo button

ashing progressively.

Machine shows second step of descaling process is under way.

Machine is supplying descaling solution. Only espresso button

ashing progressively.

Machine needs descaling.

Machine in Power-Save mode.

Machine enters into Power-Save mode after 60 minutes' use.

Touch any button to start machine again.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 71 72

Pas de commentaire

Hotpoint CM HPC HB0 H Mode d'emploi Page 17