Hotpoint E3FX Manuel d'utilisateur télécharger pdf (Page 6)

Regular cleaning is recommended, to prolong the life of the

fryer and to prevent the risk of fire.

Before cleaning or performing any cleaning or maintenance,

disconnect the appliance from the power supply. Check that

all controls are in the OFF position, '0', before reconnecting.

NEVER USE: Washing powder, harch abrasive,

scouring pads, aerosol cleaners or oven chemical

clearners of any kind.

Cleaning materials to avoid

• Household abrasive powders, eg. Vim.

• Oven chemical cleaners, aerosols and oven pads -

Caustic cleaners such as these will etch the surface and

attack the metal frame.

• Bath and sink cleaners may mark the surface.

Care and Cleaning

Troubleshooting

Before calling service for assistance, check through the

following list, there may be nothing wrong.

Nothing works.

Check to make sure that:

• the mains wall switch is switched on.

• try re-setting the safety thermostat:

- remove the oil bowl.

- unscrew the safety plug.

- press the button.

If, despite all of these checks, the appliance does not function

properly and problem persists, call Hotpoint Service (see

KEY CONTACTS, back page), informing them of:

- The type of problem.

- The abbreviation used to identify the model (Mod. ...) as

indicated on the warranty.

IMPORTANT:

Never call upon technicians not authorized by the

manufacturer, and refuse to accept spare parts that are not

original.

The steel and/or painted parts must be cleaned using suitable

products which are neither abrasive nor corrosive.

Avoid products based on chlorine (bleach etc.).

Avoid leaving acids or alkalis on the work surface (vinegar,

salt, lemon juice etc.).

Wipe over the control knobs with a soft cloth wrung out in

warm soapy water, or mild non-abrasive. Then, after wiping

with a cloth wrung out in clear water, dry with a soft clean

cloth.

1 2 3 4 5 6 7 8 9 10 11 12

Commentaires sur ces manuels

Pas de commentaire

Hotpoint E3FX Manuel d'utilisateur Page 6

Commentaires sur ces manuels