Hotpoint RLA80 Manuel d'utilisateur télécharger pdf (Page 16)

CLEANING &

MAINTENANCE

Door Reversal

Note : You may require assistance to do this:

25. Place the top hinge onto the door, slide the door onto the

bottom hinge pin and support the door whilst screwing the top

hinge bracket into position.

Ensure that the top hinge bracket is positioned correctly.

26. Adjust the front feet (see ‘Levelling’ SAFETY & INSTALLATION section).

27. Fit the bottom hinge covers (see ‘Hinge Covers’ in the SAFETY &

INSTALLATION section).

Note : Let the appliance stand upright in it’s final location for at least 15

minutes before plugging in and switching on the electricity supply.

door stop

seal stop

14. With the door furniture removed carefully lie the door

onto its interior lining.

We recommend that you lie the door onto a suitable

protective material (ie. the original packaging).

15. Remove the seal stop on the top left of the door:

Remove the fixing screw, then using a thin blunt

instrument, lever the seal stop off the door.

Repeat to remove the seal stop on the bottom left.

16. Use a screwdriver to remove the door stop from the

bottom right of the door and refit on the bottom

left.

17. Refit the seal stops, one top right the other bottom right. Push into position

and secure with fixing screw.

21. Turn the handle vertically, top to bottom and place against the right hand

side, position sealbreaker blade into the seal pocket.

22. Secure the handle in place with the original fixing screws, ensuring free

movement of mechanism.

Door Handle Reversal:

Note: This MUST be completed with the door OFF the product.

18. Remove the hole plugs from the right hand side of the door.

20. Unscrew the handle fixing screws and carefully

remove the handle from the door.

WARNING: Take care not to dislodge the internal

mechanism when removing the handle from the

door.

19. Unclip the handle snap-clip cover using a screwdriver

and rotate to reveal the handle fixing screw.

23. Rotate and snap-clip handle covers back in original

position.

24. Use the hole plugs removed from the right hand side

to fill the holes on the left.

1 2 ... 11 12 13 14 15 16 17 18 19 20

Commentaires sur ces manuels

Pas de commentaire

Hotpoint RLA80 Manuel d'utilisateur Page 16

Commentaires sur ces manuels