Hotpoint RLA80 Manuel d'utilisateur Page 4

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 20
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 3
Installation
Stability bracket:
WARNING: To prevent the fridge from tilting forwards, it must be held in place
with the stability bracket supplied. This is the responsibility of the customer.
4
SAFETY &
INSTALLATION
1. Position the fridge in its chosen
location.
2. Looking from the front of the fridge,
mark the position of the left hand
panel.
3. Move the fridge far enough away to
get clear access to the back wall.
4. In order to clear components on the
compressor mounting plate, the
stability bracket must be positioned
on the floor between 100 - 200mm
to the right of the left hand panel
mark.
Note: The fridge is heavy so care must be taken when moving it.
Fixed to the floor or wall at the rear of the
fridge, the stability bracket hooks onto the
compressor mounting plate holding the
fridge secure.
The stability bracket must be installed
securely in accordance with these
instructions BEFORE using the fridge.
position stability bracket
100 - 200mm away from
left hand panel mark.
5. Mark and drill the fixing holes and insert suitable fixings to hold the bracket firm.
6. Carefully re-position the fridge. Make sure that the compressor mounting plate
locates into the stability bracket.
Vue de la page 3
1 2 3 4 5 6 7 8 9 ... 19 20

Commentaires sur ces manuels

Pas de commentaire