Hotpoint TFA34 Manuel d'utilisateur télécharger pdf (Page 18)

If something goes wrong

First, don’t panic! There may be nothing wrong at all. Look for your

problem below, then check the things we suggest. More often than not,

this will give you the answer to your problem, and you’ll be able to carry

on without having to telephone your Service Office.

If after this you still cannot get your machine to work, follow the advice

given on the next page.

Check these things first

1. Is the machine plugged in and switched on at the socket?

2. Is the timer control set to required time?

3. Is the door securely closed?

4. Has the fuse blown? (Try plugging in another appliance to check)

5. Have you used an extension lead? Many are not suitable. Try

plugging the dryer directly into a socket to check.

1. Have you forgotten to clean the filter? Check it.

2. Have you selected the correct Heat setting for the type of fabric you

are drying?

3. Is the flexible Vent Hose blocked or kinked? Check it for foreign

objects or condensate (water).

4. Is the air inlet obstructed in any way?

5. Permanent venting - is the vent outlet obstructed?

6. Were the clothes ‘excessively wet’ when they were put in?

7. Was the correct time selected?

8. Have you overloaded the dryer?

1. Have you selected the correct heat setting?

2. Was the correct time selected?

1. Did you select Fresh Air? If it is cool outside you may expect the

clothes to feel cooler.

1. Vent hose or inlet may be blocked. Check it.

2. Have you changed your washing product?

3. Did you use the Fresh Air function? Outdoor conditions may not

have been suitable.

Have you re-read this instruction book?

Problem

‘It won’t start’

‘It is taking a long

time to dry’

‘Load feels damp’

‘Load feels cool’

‘Load has an

unusual odour’

Any other problem

1 2 ... 13 14 15 16 17 18 19 20

Pas de commentaire

Hotpoint TFA34 Manuel d'utilisateur Page 18