Hotpoint 5TCG Manuel d'utilisateur télécharger pdf (Page 22)

Installation Instructions

After installation, check for gas soundness. The supply pressure can be

checked at the grill injector. Access to the injector is by first removing

the baffle at the front of the grill fastened by two screws. Then remove

the fastening screw on the right hand side of the burner and slide the

burner off the injector. Ensure that the grill burner is correctly located

under the fixing screw on reassembly.

Model X156G only: Fit the battery.

Fit the hotplate burner bodies, enamelled discs and pan supports.

Referring to the instructions for use where necessary.

1. Check that the hotplate and grill burners ignite correctly and

burn with a steady flame. Check for a steady flame on the low

setting.

2. Check that with the oven set to mark 9, the burner ignites at

low rate, and then increases to full rate within 60 seconds.

Leave the oven full on with the door closed for 10 minutes, and

check that when the control is turned to the ‘Slow Cook’ setting that

the flame reduces.

Instruct the user on the operation of the cooker.

Operational

Checks

1 2 ... 17 18 19 20 21 22 23 24

Pas de commentaire

Hotpoint 5TCG Manuel d'utilisateur Page 22