Hotpoint X156G Manuel d'utilisateur télécharger pdf (Page 20)

Installation Instructions

Unpack the components from inside the grill and oven.

Check that the following parts are present:

Grill pan and grid Grill pan handle

Pan supports (2) Oven shelves (2)

Enamelled discs (4) Aluminium burner bodies (4)

Literature Model X156G only: Battery 1.5V

Four skid feet are fitted which can be adjusted up or down to level

the cooker.

Caution: Some soft floor coverings may get damaged if the cooker

is not moved carefully.

The cooker must be fitted with a stability device firmly secured to

the fabric of the building. One of the holes in the rear panel can be

used to engage a stability bracket.

The bracket must be

fitted to the wall behind the

cooker. The diagram is a

guide to the correct height

at which the bracket should

be from the floor.

The cooker is designed to match the depth of standard 600mm

worktops. An adaptor backplate should, therefore, be fitted within

the shaded area shown to allow the cooker to be pushed fully to the

wall. If a forward facing backplate is used, it must be chased into

the wall.

Connection to the cooker should be made with an approved

appliance flexible connection to BS 669. A length of 0.9 to 1.25m is

recommended. The length of hose chosen should be such that when

the cooker is in situ, the hose does not touch the floor.

The temperature rise of areas at the rear of the cooker that are

likely to come in contact with the flexible hose do not exceed 70˚C.

Unpacking the

Cooker

Levelling

Stability Bracket

Connecting To

The Gas Supply

155mm

Floor to bracket.

250

680

250

500

1 2 ... 15 16 17 18 19 20 21 22 23 24

Commentaires sur ces manuels

Pas de commentaire

Hotpoint X156G Manuel d'utilisateur Page 20

Commentaires sur ces manuels

Produits connexes et manuels pour Couvertures et oreillers électriques Hotpoint X156G