Hotpoint X156G Manuel d'utilisateur Page 21

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 24
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 20
21
Installation Instructions
After installation, check for gas soundness. The supply pressure
can be checked at the grill injector. Access to the injector is by
first removing the baffle at the front of the grill fastened by two
screws. Then remove the fastening screw on the right hand side of
the burner and slide the burner off the injector. Ensure that the
grill burner is correctly located under the fixing screw on reassembly.
Model X156G only: Fit the battery.
Fit the hotplate burner bodies, enamelled discs and pan supports.
Referring to the instructions for use where necessary.
1. Check that the hotplate and grill burners ignite correctly and
burn with a steady flame. Check for a steady flame on the low
setting.
2. Check that the burner ignites with the oven set to Mark 9 and
that the burner stays on when the control is released 3
seconds later. Leave the oven on Mark 9 with the door closed
for 10 minutes, then check that when the control is turned to
Mark 1 the flame reduces.
Instruct the user on the operation of the cooker.
Operational
Checks
Vue de la page 20
1 2 ... 16 17 18 19 20 21 22 23 24

Commentaires sur ces manuels

Pas de commentaire