Hotpoint HTU30 Manuel d'utilisateur télécharger pdf (Page 11)

Troubleshooting.

11

First,don’t panic!

There may be nothing wrong at all. Look for

your problem below, then check the things we

suggest.More often than not,this will give you

the answer to your problem,and you’ll be able

to carry on without having to telephone your

Service Office.

It is not working!

Are you using a plug and socket?

- Check that the plug is firmly pushed in.

- Check the power supply, by plugging in

another appliance.

- Has the fuse blown?

It is not working!

Is the mains lead wired directly into a

double pole isolating switch?

- Check that the wires in the mains lead are

correctly connected.(See page 2)

The Cooker Hood is not working

satisfactorily...

- Check you have selected the correct fan

speed.

- Check if the grease filter needs replacing

(See page 9).

- Check that there is no obstruction in the

outlet pipe.

The light is not working...

- Check the bulb is screwed in securely.

- Replace the light bulb.

The Cooker Hood switches off

intermittently...

- Check the mounting height above the

hob is correct. The heat from the hob

may cause the fan motor to

overheat/cut-out.

If,after following these instructions,you are

still having problems,contact your nearest

Service Centre (See back cover).

Parts

Please remember your new appliance is a

complex piece of equipment.

‘DIY’repairs or unqualified and untrained

service people may put you in danger, could

damage the appliance and might mean that

you lose cover under the Guarantee.

If you do experience a problem with the

appliance,don’t take any risks,call in a Service

Engineer (See back cover).

Our Parts are designed exclusively to fit only

GDA Ltd appliances. Do not use them for any

other purpose as you may create a safety

hazard.

1 2 ... 6 7 8 9 10 11 12

Commentaires sur ces manuels

Pas de commentaire