Hotpoint HMCB 50501 AA.UK.1 Guide de l'utilisateur télécharger pdf

Quick guide

THANK YOU FOR BUYING A HOTPOINT PRODUCT

In order to receive a more complete assistance, please

Before using the appliance carefully read the Safety

Instruction.

PRODUCT DESCRIPTION

FIRST TIME USE

Wait at least two hours, after the installation, before connecting

the appliance to the power supply. Connect the appliance to the

power supply it starts the operation automatically. The ideal storage

temperatures for the food are preset in the factory.

After turning the appliance on, you must wait for 4-6 hours for the

correct storage temperature to be reached for a normally lled

appliance. Position the antibacterial anti-odour lter in the fan as

demonstrated in the lter packaging (if available). If the audible signal

sounds, it means that the temperature alarm has intervened: press the

button to switch o the acoustic alarms.

CONTROL PANEL

1. LED Light

2. On/Stand-by

3. Freezer and refrigerator compartment

temperature button

ON/STANDBY

Press the button for 3 seconds to turn the appliance o. In

Stand-by mode the light in the refrigerator compartment does not turn

on. Press the button again briey to reactivate the appliance.

Note: this does not disconnect the appliance from the power supply.

FREEZER AND REFRIGERATOR

COMPARTMENT TEMPERATURE

The three LED indicators indicate the refrigerator compartment set

temperature.

It is possible to set a dierent temperature of the appliance with the

button.

The following adjustments are possible:

LEDs lit Set temperature

High (less cold)

Medium-high

Medium

Medium-low

Low (colder)

FAN*

You can turn the Fan on/o by pressing the button on the base (as

shown in the gure). If the ambient temperature exceeds

27°C, or if drops of water are present on the glass shelves,

it is essential that the fan is on to ensure the proper

preservation of the food. Deactivation of the fan allows

energy consumption to be optimised.

FREEZING FRESH FOOD

Place the fresh food to be frozen in the FREEZING ZONE in the freezer

compartment avoiding the direct contact with the food that is already

frozen. To optimize the freezing speed, the lower drawer can be

removed and the food can be placed directly on the bottom of the

compartment.

* Available only on certain models

1 2 3

Résumé du contenu

Page 1 - PRODUCT DESCRIPTION

ENQuick guideTHANK YOU FOR BUYING A HOTPOINT PRODUCTIn order to receive a more complete assistance, please register your product on www . hotpoint . e

Page 2 - STOP FROST SYSTEM*

* Available only on certain modelsSTOP FROST SYSTEM*The STOP FROST SYSTEM facilitates the defrost procedure for the freezer compartment. The STOP FROS

Page 3 - TROUBLESHOOTING

400011231795You can download the Safety Instructions, User Manual, Product Fiche and Energy data by:• Visiting our website docs . hotpoint . eu• Usi