Hotpoint NMTM 1927 F (TK) Mode d'emploi télécharger pdf (Page 12)

Installation

! Before placing your new appliance into operation

please read these operating instructions carefully.

They contain important information for safe use, for

installation and for care of the appliance.

! Please keep these operating instructions for future

reference. Pass them on to possible new owners of

the appliance.

Positioning and connection

Positioning

1. Place the appliance in a well-ventilated humidity-

free room.

2. Do not obstruct the rear fan grills. The compressor

and condenser give off heat and require good

ventilation to operate correctly and save energy.

3. Leave a space of at least 10 cm between the top

part of the appliance and any furniture above it,

and at least 5 cm between the sides and any

furniture/side walls.

4. Ensure the appliance is away from any sources of

heat (direct sunlight, electric stove, etc.).

5. In order to maintain the correct distance between

the appliance and the wall behind it, fit the

spacers supplied in the installation kit, following

the instructions provided.

Levelling

1. Install the appliance on a level and rigid floor.

2. If the floor is not perfectly horizontal, adjust the

refrigerator by tightening or loosening the front

feet.

Electrical connections

After the appliance has been transported, carefully

place it vertically and wait at least 3 hours before

connecting it to the electricity mains. Before

inserting the plug into the electrical socket ensure

the following:

• The appliance is earthed and the plug is

compliant with the law.

• The socket can withstand the maximum power of

the appliance, which is indicated on the data plate

located on the bottom left side of the fridge (e.g.

150 W).

• The voltage must be in the range between the

values indicated on the data plate located on the

bottom left side (e.g. 220-240V).

• The socket is compatible with the plug of the

appliance.

If the socket is incompatible with the plug, ask an

authorised technician to replace it (

see

Assistance

). Do not use extension cords or

multiple sockets.

! Once the appliance has been installed, the power

supply cable and the electrical socket must be

easily accessible.

! The cable must not be bent or compressed.

! The cable must be checked regularly and replaced

by authorised technicians only (see Assistance).

! The manufacturer declines any liability should

these safety measures not be observed.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Commentaires sur ces manuels

Pas de commentaire

Hotpoint NMTM 1927 F (TK) Mode d'emploi Page 12

Commentaires sur ces manuels

Produits connexes et manuels pour Réfrigérateurs-congélateurs Hotpoint NMTM 1927 F (TK)