Hotpoint NMTM 1927 F (TK) Mode d'emploi télécharger pdf (Page 16)

Maintenance and care

Switching the appliance off

During cleaning and maintenance it is necessary to

disconnect the appliance from the electricity supply:

It is not sufficient to set the FREEZER OPERATION

Knob

on OFF

(appliance off) to eliminate all electrical

contact.

Cleaning the appliance

• The external and internal parts, as well as the rubber

seals may be cleaned using a sponge that has been

soaked in lukewarm water and bicarbonate of soda

or neutral soap. Do not use solvents, abrasive

products, bleach or ammonia.

• The removable accessories may be soaked in warm

water and soap or dishwashing liquid. Rinse and dry

them carefully.

• The back of the appliance may collect dust which

can be removed by delicately using the hose of a

vacuum cleaner set on medium power. The

appliance must be switched off and the plug must

be pulled out before cleaning the appliance.

Avoiding mould and unpleasant odours

• The appliance is manufactured with hygienic

materials which are odour free. In order to maintain

an odour free refrigerator and to prevent the

formation of stains, food must always be covered or

sealed properly.

• If you want to switch the appliance off for an

extended period of time, clean the inside and leave

the doors open.

Replacing the light bulb

To replace the light bulb in the refrigerator compartment,

pull out the plug from the electrical socket. Follow the

instructions below which may vary according to the

model of the appliance.

Access the light bulb as shown (

see diagram

) and

replace it with a similar light bulb, the power of which

should not exceed 10 W.

1 2 ... 11 12 13 14 15 16 17 18 19 20

Pas de commentaire

Hotpoint NMTM 1927 F (TK) Mode d'emploi Page 16