Hotpoint NMTM 1927 F (TK) Mode d'emploi télécharger pdf (Page 18)

Troubleshooting

Assistance

If the appliance does not work, before calling for Assistance (

see Assistance

), check for a solution from the following list.

Malfunctions:

The internal light does not

illuminate.

The motor does not start.

The refrigerator and the freezer do

not cool well.

The food inside the refrigerator is

beginning to freeze.

The motor runs continuously.

The appliance makes a lot of noise.

Some of the external parts of the

refrigerator become hot

Possible causes / Solutions:

• The plug has not been inserted into the electrical socket, or not far

enough to make contact, or there is no power in the house.

• The appliance comes with a motor protection control (

see Start-up and use

• The doors do not close properly or the seals are damaged.

• The doors are opened too frequently.

• The TEMPERATURE ADJUSTMENT knob is not in the correct position

• The refrigerator or the freezer have been over-filled.

• The TEMPERATURE ADJUSTMENT knob is not in the correct position.

• The door is not closed properly or is continuously opened.

• The outside ambient temperature is very high.

• The appliance has not been installed on a level surface (

see

Installation

)

• The appliance has been installed between cabinets that vibrate and

make noise.

• The internal refrigerant makes a slight noise even when the

compressor is off. This is not a defect, it is normal.

• These raised temperatures are necessary in order to avoid the

formation of condensation on certain parts of the product.

1 2 ... 13 14 15 16 17 18 19 20

Pas de commentaire

Hotpoint NMTM 1927 F (TK) Mode d'emploi Page 18