Hotpoint KRMB 1010 Mode d'emploi télécharger pdf (Page 10)

STOP FROST SYSTEM (depending on the model)

The STOP FROST SYSTEM (available depending on the model) facilitates the defrost procedure for the

freezer compartment. The STOP FROST accessory (figure 1) is designed to collect some of the frost that

forms in the freezer compartment and it is easy to remove and clean, therefore reducing the time needed to

defrost the inside of the freezer compartment.

To remove the frost on the STOP FROST accessory follow the cleaning procedure demonstrated below.

- Open the freezer compartment door and remove

the upper drawer (figure 2).

- Unfasten the STOP FROST accessory (figure 3)

and remove it (figure 4), taking care not to drop

it on the glass shelf below.

Note: if the accessory is jammed or difficult to

remove, do not keep trying to remove it,

but proceed with the complete defrost of the

freezer compartment.

- Close the door to the freezer compartment.

- Remove the frost on the accessory by rinsing it

under running (not hot) water (figure 5).

- Let the accessory drip dry and dry the plastic

parts with a soft cloth.

- Reinsert the accessory by placing the back part

on the projections shown in figure 7-A, then

refasten the handle of the accessory to the clasps

above (figure 7-B).

- Reinsert the upper drawer and close the door to

the freezer compartment.

It is possible to clean the STOP FROST accessory

on its own without completely defrosting the freezer

compartment. Cleaning the STOP FROST

accessory regularly helps to reduce the need to

completely defrost the freezer compartment.

Note: the product specifications, including volume and energy, are calculated without the STOP FROST

accessory.

Procedure to clean the STOP FROST accessory

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

Pas de commentaire

Hotpoint KRMB 1010 Mode d'emploi Page 10