Hotpoint V4D 01 P (UK) Mode d'emploi Page 3

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 4
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 2
Do not tumble dry items containing foam rubber
(also known as latex foam), or similarly textured
rubber like materials. Foam rubber materials
can, when heated, produce fi re by spontaneous
combustion.
Fabric softener or similar products should
not be used in a tumble dryer to eliminate the
effects of static electricity unless the practice is
specifi cally recommended by the manufacturer
of the fabric softener product.
Do not tumble dry undergarments that contain
metal reinforcements eg. bras with metal
reinforcing wires. Damage to the tumble dryer
can result if the metal reinforcements come
loose during drying.
Do not tumble dry rubber, plastic articles such
as shower caps or babies waterproof covers,
polythene or paper.
Do not tumble dry rubber backed articles,
clothes fi tted with foam rubber pads, pillows,
galoshes and rubber coated tennis shoes.
Remove all objects from pockets, especially
lighters.
WARNING: Never stop the dryer before the end of the
drying cycle unless all items are quickly removed and
spread out so that the heat is dissipated.
Dryer Description
Control panel
Heat Button
Mains On’ Light
Indicator
Timer Knob
MAIN
OFF
120’
110
100’
90’
80’
70’
60’
50’
40’
30’
20’
10’
The HEAT button selects drying temperature.
OUT: LOW heat IN: HIGH heat
The TIMER knob sets the drying time: rotate it clockwise, NEVER
COUNTER-CLOCKWISE, until the indictor is pointing to the drying
time you want to select.
Set the program knob to OFF to switch off the machine.
CHOOSING A PROGRAMME
1. Plug the dryer into the electrical socket.
2. Sort your laundry according to fabric type.
3. Open the door and make sure the fi lter is clean and in place.
4. Load the machine and make sure items are not in the way of the
door seal. Close door.
5. Set the temperature with the HEAT button. High heat for Cotton
and synthetics. Low heat for delicates and acrylics.
6. Select a drying time by rotating the TIMER knob clockwise.
The tables below show APPROXIMATE drying times in minutes.
Weights refer to dry garment weights.
Standard Cotton - High (full) Heat
Drying times 800-1000rpm spin in washing machine
1kg 2kg 3kg 4kg
30-40mins 40-55mins 60-70mins 85-100mins
Synthetics - High (full) Heat
Drying times on reduced spin in washing machine
1kg 2kg
20-30mins 30-45mins
Acrylics - Low (gentle) Heat
Drying times on reduced spin in washing machine
1kg 2kg
30-50mins 50-70mins
Troubleshooting
Before you call the service centre go through the following
troubleshooting suggestions:
PROBLEM:
The dryer won’t start.
POSSIBLE CAUSES/SOLUTION:
• The plug is not in the socket or making contact.
• There has been a power failure.
The fuse has blown. Try to plug another appliance into the socket.
You are using an extension cord? Try to plug the dryer directly
into the socket.
• The timer knob has not been set properly.
• The start button has not been pressed.
The start button was pressed with the door open. Make sure the
door is closed before pressing the start button.
PROBLEM:
It is taking a long time to dry.
POSSIBLE CAUSES/SOLUTION:
• The fi lter has not been cleaned.
• The temperature setting is not correct.
The correct time has not been selected.
• The vent tube or air intake vent is obstructed.
• The items were too wet.
The dryer was over loaded.
Vue de la page 2
1 2 3 4

Commentaires sur ces manuels

Pas de commentaire