Hotpoint SI C35 CKG UK Mode d'emploi télécharger pdf (Page 8)

electrical socket.

1. Set the steam regulator (3) to Off.

2. Tilt the iron in such a position to make water

entrance easier.

3. Openthelidofthellerhole(15)andllthewater

reservoir using the water measurer supplied with

theiron.Neverllthewaterreservoirabovethe

maximum water level (12).

4. Closethelidofthellinghole.

USING THE IRON

Selecting the temperature

and adjusting the steam (B)

1. Connect the plug of the appliance into a

grounded socket (220-240V).

2. Use the temperature control (5) to select the

desired temperature. If you go from a lower

temperature to a higher temperature, the

temperature indicator light (6) light up until the

selected temperature is reached.

3. When the iron reaches the set temperature, an

acoustic signal is emitted and the temperature

indicator light goes off.

4. We recommend to check the garment label

in order to identify the fabric type. In case of

doubts, it is recommended not to use the spray

function and iron a hidden corner in order to

determine the most appropriate temperature

and avoid damaging the fabric. In case of very

delicate fabrics, such as silk, wool, and synthetic

materials, iron the garment inside out to prevent

shiny marks. Start ironing the garments that

require a lower temperature, such as synthetic

fabrics.

Fabrics with this symbol on the label

must not be ironed.

GARMENT

LABEL

FABRIC TYPE

TEMPERATURE

INDICATION

STEAM

INDICATION

synthetic

silk

mixed cotton

wool

mixed wool

cotton

linen

jeans

MIN

LINEN

5. Select the steam level with the steam regulator

(3) or move it to Off to iron without steam. When

steam ironing, make sure that the water level in

the reservoir is at least ¼.

USE

Ironing without steam (C)

1. Set the steam regulator (3) to Off (=no steam).

2. Select the recommended ironing temperature

with the temperature control (5) (see step B and

chapter “Using the iron”, section “Selecting the

temperature and adjusting the steam”).

Steam ironing (D)

1. Check that the water level in the reservoir is

higher than ¼.

2. Select the appropriate steam with the steam

regulator (3) and the recommended ironing

temperature with the temperature selector (5)

(see step B and chapter “Using the iron”, section

“Selecting the temperature and adjusting the

steam”).

Using the ECO function you can have a 30% of

energy saving and 30% of water saving.

Ironing with shot of steam (E

)

The shot of steam function allows you to eliminate

persistent wrinkles. You can use this function both in

no-steam and steam ironing mode.

1. Check that the water level in the reservoir is

higher than ¼.

2. Select the recommended ironing temperature

with the temperature control (5) (see step B and

chapter “Using the iron”, section “Selecting the

temperature and adjusting the steam”).

3. Press the shot of steam button (1) to obtain

an extra steam ow when ironing. If the shot

of steam function has not been used for some

time, it may be necessary to press the button

repeatedly to activate the pump.

FEATURES

Spray function (F)

The spray function is used to dampen the garment in

order to remove persistent wrinkles easily. You can

use the spray function both in no-steam and steam

ironing mode at any temperature.

1. Check that the water level in the reservoir is

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Commentaires sur ces manuels

Pas de commentaire

Hotpoint SI C35 CKG UK Mode d'emploi Page 8

Commentaires sur ces manuels