99
en
CLEANING AND
MAINTENANCE
After use (I)
1. Set the steam regulator (3) to Off, disconnect the
appliance plug from the electrical socket and let
the iron cool down.
2. Empty the water reservoir (11).
3. Wind the cord around the cable winder (8) and
store the iron in vertical position, in a dry safe
place.
Never store the iron in horizontal position.
Always use the stand at the back of the iron.
Cleaning (J)
Never use aggressive and/or abrasive
substances to clean the plastic parts and
the iron soleplate.
1. Set the steam regulator (3) to Off, disconnect the
appliance plug from the electrical socket and let
the iron cool down.
2. Use a dry or slightly dampened soft cloth to
clean the upper part of the iron.
3. For the ordinary cleaning and/or removal of
stains or other residues deposited on the plate,
clean with a dampened soft cloth and dry.
4. Use a dampened cotton tip to eliminate scale in
the steam holes that may impair the performance
of your iron.
In order to keep the soleplate perfectly
smooth and polished, avoid contacts with
metal objects, do not iron sharp objects, such as
buttons, studs and hinges in order to avoid
scratching the plate.
5. Regularly rinse the reservoir with clean water.
After cleaning, always empty the water reservoir.
Auto-Clean Function (K)
If you have been using water from the tap, we
recommend starting the Auto-Clean function after
ironing.
The use of the Auto-Clean function should
not be deemed the same as using deminera-
lised water on a regular basis.
1. Check that the appliance is disconnected from
the electrical socket and the steam regulator is
(3) set to Off.
higher than ¼.
2. With the iron in horizontal position, press the
spray button (2) to dampen the garment.
Vertical steam function (G)
The vertical steam function is useful to eliminate
wrinkles from hanging garments, curtains, etc. You
can use this function by simply placing the iron in
vertical position. All functions of the appliance will
remain unchanged also in this position (refer to
chapter “Use” according to the model).
Do not direct steam towards people or
animals and do not iron garments while
worn.
Anti-drip function
The iron is provided with anti-drip function in order to
automatically interrupt the steam distribution when the
temperature is too low, thus preventing water dripping
out of the soleplate.
Do not use steam with low temperatures
(see chart in step B, chapter “Using the
iron”, according to the type of iron you are using).
Automatic switch-off
function (H)
The automatic switch-off function guarantees total
safety.
This function automatically switches off the iron when
it is not used for a few minutes. In particular:
• the iron switches off automatically after 30
seconds when left unattended in the ironing
position or sideways;
• the iron switches off automatically after 8
minutes when left unattended in the rest position
(vertical).
If you leave the iron unattended the operating lamp
ashed to inform that the automatic switch-off function
is active.
Simply move the iron to switch it back on.
Wait until the temperature indicator light
turns off before starting ironing again.
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels