1010
en
no-steam and steam ironing mode.
1. Check that the water level in the reservoir is
higher than ¼.
2. Select the recommended ironing temperature
with the temperature buttons +/- (4a) (see step B1
and chapter “Using the iron”, section “Selecting
the temperature and adjusting the steam”).
3. Press the shot of steam button (1) to obtain
an extra steam ow when ironing. If the shot
of steam function has not been used for some
time, it may be necessary to press the button
repeatedly to activate the pump.
If the water in the reservoir is nished, it
may be necessary to press the shot of
steam button several times to (re)activate the
pump, after lling the water reservoir again.
USE
When switching on the iron for the rst
time, you may notice an unpleasant odour, a
little smoke and some impurities from the
manufacturing process that will disappear in a
few minutes.
Ironing without steam (C
2
)
1. Set the steam regulator (3) to Off (=no steam).
2. Select the recommended ironing temperature
with the temperature control (4b) (see step B
2
and chapter “Using the iron”, section “Selecting
the temperature and adjusting the steam”).
Steam ironing (D
2
)
1. Check that the water level in the reservoir is
higher than ¼.
2. Select the appropriate steam with the steam
regulator (3) and the recommended ironing
temperature with the temperature selector
(4b) (see step B
2
and chapter “Using the iron”,
section “Selecting the temperature and adjusting
the steam”).
The iron starts producing steam as soon as
it reaches the set temperature.
Ironing with shot of steam (E
2
)
The shot of steam function allows you to eliminate
persistent wrinkles. You can use this function both in
no-steam and steam ironing mode.
1. Check that the water level in the reservoir is
higher than ¼.
2. Select the recommended ironing temperature
with the temperature control (4b) (see step B
2
Fabrics with this symbol on the label must
not be ironed.
GARMENT
LABEL
FABRIC TYPE
TEMPERATURE
INDICATION
STEAM
INDICATION
synthetic
silk
mixed cotton
wool
mixed wool
cotton
linen
jeans
MIN
LINEN
5. Select the steam level with the steam regulator
(3) or move it to Off to iron without steam. When
steam ironing, make sure that the water level in
the reservoir is at least ¼.
USE
LCD
When switching on the iron for the rst
time, you may notice an unpleasant odour, a
little smoke and some impurities from the
manufacturing process that will disappear in a
few minutes.
Ironing without steam (C
1
)
1. Set the steam regulator (3) to Off (=no steam).
2. Select the recommended ironing temperature
with the temperature buttons +/- (4a) (see step B
1
and chapter “Using the iron”, section “Selecting
the temperature and adjusting the steam”).
Steam ironing (D
1
)
1. Check that the water level in the reservoir is
higher than ¼.
2. Select the appropriate steam with the steam
regulator (3) and the recommended ironing
temperature with the temperature buttons +/-
(4a) (see step B
1
and chapter “Using the iron”,
section “Selecting the temperature and adjusting
the steam”).
The iron starts producing steam as soon as
it reaches the set temperature.
Ironing with shot of steam (E
1
)
The shot of steam function allows you to eliminate
persistent wrinkles. You can use this function both in
(108 pages)
(12 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels