Hotpoint SI E40 BA1 UK Mode d'emploi télécharger pdf (Page 11)

1111

and chapter “Using the iron”, section “Selecting

the temperature and adjusting the steam”).

3. Press the shot of steam button (1) to obtain

an extra steam ow when ironing. If the shot

of steam function has not been used for some

time, it may be necessary to press the button

repeatedly to activate the pump.

If the water in the reservoir is nished, it

may be necessary to press the shot of

steam button several times to (re)activate the

pump, after lling the water reservoir again.

FEATURES

Spray function (F)

The spray function is used to dampen the garment in

order to remove persistent wrinkles easily. You can

use the spray function both in no-steam and steam

ironing mode at any temperature.

1. Check that the water level in the reservoir is

higher than ¼.

2. With the iron in horizontal position, press the

spray button (2) to dampen the garment.

Vertical steam function (G)

The vertical steam function is useful to eliminate

wrinkles from hanging garments, curtains, etc. You

can use this function by simply placing the iron in

vertical position. All functions of the appliance will

remain unchanged also in this position (refer to

chapter “Use” according to the model).

Do not direct steam towards people or

animals and do not iron garments while

worn.

Anti-drip function

The iron is provided with anti-drip function in order to

automatically interrupt the steam distribution when the

temperature is too low, thus preventing water dripping

out of the soleplate.

Do not use steam with low temperatures

(see chart in step B

and B

, chapter “Using

the iron”, according to the type of iron you are

using).

Automatic Stand-By

function (H

)

LCD

The automatic stand-by function guarantees total

safety.

This function automatically switches off the iron when

it is not used for a few minutes. In particular:

• the iron switches off automatically after 30

seconds when left unattended in the ironing

position or sideways;

• the iron switches off automatically after 10

minutes when left unattended in the rest position

(vertical).

Ifyouleavetheironunattended,thedisplayashesa

green light and an acoustic signal is emitted to inform

that the automatic stand-by function is active.

Simply move the iron or press the temperature buttons

+/- (4a) to switch it back on.

Wait until the display becomes green before

starting ironing again.

Automatic switch-off

function (H

)

The automatic switch-off function guarantees total

safety.

This function automatically switches off the iron when

it is not used for a few minutes. In particular:

• the iron switches off automatically after 30

seconds when left unattended in the ironing

position or sideways;

• the iron switches off automatically after 10

minutes when left unattended in the rest position

(vertical).

If you leave the iron unattended an acoustic signal is

emitted to inform that the automatic switch-off function

is active.

Simply move the iron to switch it back on.

Wait until the temperature indicator light

turns off before starting ironing again.

CLEANING AND

MAINTENANCE

After use (I)

1. Set the steam regulator (3) to Off, disconnect the

appliance plug from the electrical socket and let

the iron cool down.

2. Empty the water reservoir (9).

3. Wind the cord around the cable winder (6) and

store the iron in vertical position, in a dry safe

place.

Never store the iron in horizontal position.

Always use the stand at the back of the iron.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

Commentaires sur ces manuels

Pas de commentaire

Hotpoint SI E40 BA1 UK Mode d'emploi Page 11

Commentaires sur ces manuels

Produits connexes et manuels pour Fers à repasser Hotpoint SI E40 BA1 UK