Hotpoint SI E40 BA1 UK Mode d'emploi Page 14

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 16
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 13
1414
en
• The plug may not be inserted into the electrical socket, or it may not
make contact.
• Check that the temperature is not set to MIN.
• The temperature indicator light turns on to indicate that the iron is
getting hot. The indicator light turns off when the set temperature is
reached.
• The steam regulator is set to Off.
• Not enough water in the water reservoir. Fill the water reservoir.
• Theironisnotsufcientlyhotand/ortheanti-dripfunctionisactive.
Replace the iron in vertical position, using the stand, and wait until
the temperature indicator light tuns off or the LCD becomes red
before starting to iron.
• The plate temperature may be too low due to the excessively frequent
activation of the shot of steam button. Slightly increase the interval
between steam shots.
• There may be residues in the vaporisation chamber. Make the
cleaning operations (see chapter “Cleaning and maintenance”,
section “Auto-Clean Function” according to the model).
• You are using perfume, vinegar, starch, vinegar, starch, scale-
removing agents, ironing products or other chemical substances.
Remember that these substances may damage the product. Rinse
the water reservoir.
• .You are using starch. You can use starch directly on the inside out of
the fabrics and in any case never in the water reservoir.
• The garment was not washed correctly or has some soap residues.
• Youareironinganewgarmentthatwasnotwashedforthersttime.
The soleplate remains cold
and does not warm up.
The temperature indicator
light turns on and off.
Steam comes out in reduced
quantity or does not come
out.
Impurities come out from
the soleplate and stain the
garments.
TROUBLESHOOTING
Problem Possible cause / Solutions
Recycling and Disposal Information
AspartofHotpoint’scontinuedcommitmenttohelpingtheenvironment,
Hotpoint reserves the right to use quality, recycled components to keep
down customer costs and minimise material wastage.
Please dispose of packaging and old products carefully.
Register your new product and get a second year FREE!
Wewantto giveyou additional benets of ownershipof yourproduct
and offer you an additional free 2 year guarantee when you register your
product with Hotpoint within 28 days of purchase. If you do not register
your product with Hotpoint within 28 days, your product is guaranteed
for 1 year only.
To activate your 3 year guarantee register with us online at www.
hotpoint.co.uk. Please note that the 3 year guarantee is only available in
UK and Ireland and is subject to the same conditions as the 1 year Gua-
rantee.Pleaserefertothecerticateofguaranteeformoreinformation.
DISPOSAL OF OLD ELECTRICAL
APPLIANCES
The European Directive 2002/96/EC on Waste Electrical
and Electronic Equipment (WEEE), requires that old hou-
sehold electrical appliances must not be disposed of in the
normal unsorted municipal waste stream.
Old appliances must be collected separately in order to op-
timise the recovery and recycling of the materials they con-
tain and reduce the impact on human health and the envi-
ronment.
The crossed out “wheeled bin” symbol on the product reminds you of
your obligation, that when you dispose of the appliance it must be sepa-
rately collected. Consumers should contact their local authority or retai-
ler for information concerning the correct disposal of their old appliance.
Vue de la page 13
1 2 ... 9 10 11 12 13 14 15 16

Commentaires sur ces manuels

Pas de commentaire