Hotpoint CX109SV6 (CR) AUS Mode d'emploi Page 7

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 32
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 6
7
AUS
Oven Timer Operation
AUTO COOKING PROGRAMMES
There are two Auto Cooking programmes that can be
selected using your timer:-
(a) To set the timer to switch the oven(s) On and Off
Automatically
(b) To set timer to switch on immediately and OFF
automatically after a set cook period.
a) TO SET THE TIMER TO SWITCH THE
OVEN(S) ON AND OFF AUTOMATICALLY
This allows you to cook at a specified time for a
chosen period before the oven switches off
Automatically.
Step 1 Check that the correct time of day is set, if
not follow instructions for setting the time
of day.
Step 2 Place food onto the correct shelf position
in the oven and close the oven door(s).
Step 3 Press and hold in the
Cook Period button. The display
will read 0.00 with the 'cookpot'
symbol lit.
Step 4 With the Cook Period
button still held in, set the
required Cook Period using the
"+" and "-" buttons.
Release the buttons and the
timer display will revert to the
time of day with the 'Auto'
symbol and 'cookpot' symbol lit.
Step 5 Press and hold in the
End Time button. The display
will read the earliest possible
end time for the Cook Period that
you have set above. The 'Auto'
symbol and 'cookpot' symbol
will be lit.
Step 6 With the End Time
button still held in, use the "+"
and "-" buttons to set the 'End
Time' (i.e. The time you require
the oven to switch off ).
Release all the buttons and the timer will revert back
to the time of day.
000
.
A
U
T
O
4120
.
A
U
T
O
6120
.
The 'Auto' symbol will remain lit
to signify that an Auto Cooking
Programme has been set. The
'cookpot' symbol will go out.
Step 7 Turn the oven control(s)
to the required temperature, and
if necessary select the
appropriate oven function.
At the end of the Automatic Cook
Period the Auto Symbol will flash
and an intermittent bleeping
sound will be heard.
The audible tone will continue unless cancelled.
The 'Auto' symbol will continue to flash until the
timer is returned to Manual operation (see below).
Step 8 Press the Manual
button, the audible tone will be
cancelled and the oven(s) will be
returned to Manual.
Step 9 Turn the oven control(s) to the OFF position.
Note 1 When cooking automatically the Cook
Period can be checked at any time by
simply pressing the Cook Period button.
Note 2 When cooking automatically the End
Time can be checked at any time by
simply pressing the End Time button.
b) TO SET TIMER TO SWITCH ON
IMMEDIATELY AND OFF AUTOMATICALLY
AFTER A SET COOK PERIOD
Step 1 Check that the correct time of day is set, if
not follow instructions for setting the time
of day.
Step 2 Place food onto the correct shelf position
in the oven and close the oven door(s).
Step 3 Turn the oven control(s) to the required tem-
perature, and if necessary select the
appropriate oven function.
Step 4 Press & hold in the
Cook Period button, the display
will read 0.00 and the 'cookpot'
symbol will light up.
With the Cook Period button still
held in set the required Cook
Period using the "+" and "-"
buttons. Example: 1hr 30
minutes (as shown).
A
U
T
O
4120
.
A
U
T
O
6120
.
6120
.
130
.
Vue de la page 6
1 2 3 4 5 6 7 8 9 10 11 12 ... 31 32

Commentaires sur ces manuels

Pas de commentaire