Hotpoint SD97PEI Mode d'emploi télécharger pdf (Page 14)

How to Keep Your Oven in Shape

Before cleaning your oven, or performing maintenance,

disconnect it from the power supply.

To extend the life of your oven, it must be cleaned

frequently, keeping in mind that:

• Do not use steam equipment to clean the appliance.

• the enamelled or stainless steel parts should be

washed with lukewarm water without using any abra-

sive powders or corrosive substances which could ruin

them; Stainless steel could get stained. If these stains

are difficult to remove, use special products available

on the market. After cleaning, it is advisable to rinse

thoroughly and dry.

• the inside of the oven should preferably be cleaned

immediately after use, when it is still warm, with hot

water and soap; the soap should be rinsed away and

the interior dried thoroughly. Avoid using abrasive de-

tergents (for example cleaning powders, etc…) and

abrasive sponges for dishes or acids (such as

limescale-remover, etc…) as these could damage the

enamel. If the grease spots and dirt are particularly

tough to remove, use a special product for oven clean-

ing, following the instructions provided on the packet.

• if you use your oven for an extended period of time,

condensation may form. Dry it using a soft cloth.

• it is important to ensure that the seal around the oven door

opening is not damaged. Should it be damaged, please

contact your nearest After-sales Service Centre. We

recommend you avoid using the oven until it has been

repaired.

• never line the oven bottom with aluminium foil, as the

consequent accumulation of heat could compromise

the cooking and even damage the enamel.

• clean the glass door using non-abrasive products or

sponges and dry it with a soft cloth.

How to remove the oven door

For a more thorough clean, you can remove the oven

door. Proceed as follows:

• open the door fully;

• lift up and turn the small levers situated on the two

hinges;

• grip the door on the two external sides, shut it slowly

but not completely;

• pull the door towards you, pulling it out of its seat;

Reassemble the door by following the above procedures

backwards.

Replacing the oven lamp

• Always unplug the appliance from the mains or switch

off the main switch before all operations.

• With the aid of a narrow, flat item (such as a screwdriver

or a spoon handle, etc...), remove the glass cover.

• Unscrew the lamp and replace it with another featuring

the same characteristics:

- voltage 230/240 V

- wattage 15 W

- type E 14

• Replace the glass cover and ensure you reposition the

seal correctly.

132

123

Glass door

Seal

Lamp

Oven

compartment

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20

Commentaires sur ces manuels

Pas de commentaire

Hotpoint SD97PEI Mode d'emploi Page 14

Commentaires sur ces manuels

Produits connexes et manuels pour Accessoires de cuisine et de ménage Hotpoint SD97PEI