Hotpoint 50cm Electric Cooker HUE52G Manuel d'utilisateur télécharger pdf (Page 8)

Electronic Timer

/Minute Minder*

*Available only in certain models

To set the clock

Note: This may be set while the oven is switched off or

while it is switched on.

1. Press the

button several times until the icon

and the first two numerical digits on the display

start to flash.

2. Use the “+” and “-” buttons to adjust the hour value.

3. Press the

button again so that the other two

numerical digits on the display begin to flash.

4. Use the “+” and “-” buttons to adjust the minute

value.

5. Press the

button again to confirm.

Note: If none of the buttons are pressed, the settings

will be confirmed automatically after 10 seconds have

passed.

Manual Mode

The programmer after the Power up and the Clock time

setting will be in ‘Manual Mode’ and shall be possible

to engage the other programmer functions using the

selector.

The oven will be driven directly by the user by means

of the knobs present on the control panel.

To set the timer countdown

Note: This function does not interrupt cooking and

does not affect the oven; it is simply used to activate

the buzzer when the set amount of time has elapsed.

1. Press the

button several times until the icon

and the first two numerical digits on the display

start to flash.

2. Follow steps 2 to 5 “to set the clock” as detailed

above.

The countdown will then be displayed; at the end of

this period of time the buzzer will sound (this may be

End cooking

time setting

Clock

time setting

Selector

button

Cooking

time setting

Count down

time setting

stopped by pressing any of the buttons, or it will stop of

its own accord after one minute).

Programming the duration cooking

Note: A cooking mode must be selected before

programming can take place.

1. Press the

button several times until the icon

and the first digit on the display flash.

2. Follow steps 2 to 5 “to set the clock” as detailed

above.

• For example: it is 9:00 a.m. and a time of 1 hour

and 15 minutes is programmed. The programme

will stop automatically at 10:15 a.m.

Programming delayed cooking

Note: A cooking duration must be selected before

delayed programming can take place.

1. Follow istruction “programming the duration cooking”

as detailed above.

2. Then press the

button until the icon and

the two digits on the display flash.

3. Follow steps 2 to 5 “to set the clock” as detailed

above.

•For example: it is 9:00 a.m. and a time of 1 hour and

15 minutes is programmed and the end time is set to

12:30. The programme will start automatically at 11:15

a.m.

Programming has been set when the

and

icons are illuminated. The TIME display shows the

cooking end time and the cooking duration alternately.

To cancel a previous setting

Press button “-” up until 0 00.

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 23 24

Commentaires sur ces manuels

Pas de commentaire

Hotpoint 50cm Electric Cooker HUE52G Manuel d'utilisateur Page 8

Commentaires sur ces manuels