Hotpoint MWH 2734 B Mode d'emploi télécharger pdf (Page 7)

Depending on the selected function, it could be

needed to add / stir / turn food during cooking. In

these cases the oven will pause cooking and it

will ask you to perform the needed action. When

required, you should:

1. Open the door.

2. Add / Stir / Turn the food (depending on the

required action).

3. Close the door and restart by pressing the

Jet Start button.

ADD / STIR / TURN FOOD

START PROTECTION / CHILD LOCK

This automatic safety function is activated one min-

ute after the oven has returned to “Stand-by mode”.

When the safety function is active the door must

be opened and closed in order to start the cooking,

otherwise the display will show “door”.

PAUSE OR STOP COOKING

To pause cooking:

The cooking can be paused to check, turn or stir the

food by opening the door. The setting will be main-

tained for 5 minutes.

To continue cooking:

Close the door and press the Jet Start button ONCE.

The cooking is resumed from where it was paused.

If you don’t want to continue cooking you can:

Remove the food, close the door and press the Stop

button.

When the cooking is finished:

A beep will signal once a minute for 10 minutes when

thecookingisnished.PresstheStopbuttonor

open the door to cancel the signal.

STAND-BY MODE

The oven is in Stand-by mode when the clock is

displayed (or, if the clock has not been set, when the

display will show “:”).

DOOR

•Ifthedoorisnotopenedwithin2minutes

since the request to Add food, the oven will

stop and it will go in Stand-by mode.

•Ifthedoorisnotopenedwithin2minutessince

the request to Stir or Turn the food, the oven will

continue the cooking process (in this case the

nalresultsmaynotbetheoptimalones).

CLOCK

•If the clock has not been set after plug in,

the clock will shows “12:00”.

•During the setting of the clock, if you press the

Stop button or if the setting is not completed after a

long time, the oven will exit from setting mode and

the setting will be invalid, display will shows “:”.

To set the Clock of your appliance:

1. Press & hold the Auto Clean button for 3 sec-

onds.

2. Press the Plus/Minus buttons to set the

hours.

3. Press the OK/Jet Start. The minutes will start

blinking.

4. Press the Plus/Minus buttons to set the min-

utes.

5. Press the OK/Jet Start button.The clock is

set.

Note:

The first time the appliance is plugged in (or after a

power failure), the prodct will automatically enter the

Clock Setting mode; in this case, please follow the

above procedure starting from step No.2.

STOP TURNTABLE

To get the best possible results with this particular

microwave, the Glass Turntable has to rotate while

cooking.

However,incaseyouneedtouseverylargedishes

that could not turn freely in the oven, it is possible

to stop the rotation of the Glass Turntable using the

Stop Turntable function,

This function works only with the following cooking

functions:

- Forced Air

- Combi Grill (Microwave + Grill)

- Combi Air (Microwave + Forced Air)

hotpoint.co.uk

1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

Commentaires sur ces manuels

Pas de commentaire

Hotpoint MWH 2734 B Mode d'emploi Page 7

Commentaires sur ces manuels

Produits connexes et manuels pour Micro-ondes Hotpoint MWH 2734 B