Hotpoint EGZH 5800 IN Mode d'emploi

16INSTRUCTIONS FOR USEINSTALLATION ...17SAFEGUARDING THE ENVIRONMENT...20IMPORTA

253.Lift the bottom of the first sheet of glass and remove it (fig. 3).4.Then remove the 2 remaining sheets of glass (fig. 4, fig. 5).5.Refit the shee

26Pay attention to the hinges when cleaning and/or removing the door (fig. 8).To remount the door:1.Insert the hinges into their grooves and lower the

27TROUBLESHOOTING GUIDEOven not working:_Check for the presence of mains electrical power and if the oven is connected to the electrical supply._Turn

17INSTALLATIONRecommendationsIMPORTANT: Disconnect the oven from the mains before carrying out any installation work or servicing._Installation must b

18_For ovens installed under the worktop, leave a minimum clearance of 5 mm between the upper edge of the oven and the lower edge of the worktop (fig.

19Connecting the oven to the power supply_Make sure that the voltage indicated on the rating plate is the same as the mains voltage. The rating plate

20SAFEGUARDING THE ENVIRONMENTDisposal of packaging materials_The packaging material is 100% recyclable and is marked with the recycle symbol ._The va

21_Do not pull the appliance or the power supply cable to disconnect them from the electrical supply._Do not allow children to touch:- the oven and it

22OVEN ACCESSORIES Accessories supplied depend on the model. The accessories provided with the oven are listed in the Product Description Sheet provid

23CARE AND MAINTENANCEImportant: never clean the appliance with high pressure water or steam cleaning equipment.Exterior of the oven_Clean with a damp

24Attention: When carrying out the following operations it is advisable to wear protective gloves. These instructions should be carefully followed bot