Hotpoint JBP21 Manuel d'utilisateur télécharger pdf (Page 31)

31

ge.com

Operating

Instructions

Care and Cleaning

Installation

Instructions

Troubleshooting Tips

Safety Instructions

Consumer Support

Painted surfaces include the sides of the

range and the sides of the door trim.

To clean the painted surfaces, use a hot,

damp cloth with a mild detergent suitable

for these surfaces. Use a clean, hot, damp

cloth to remove soap. Dry with a dry, clean

cloth.

Do not use steel-wood pads, commercial

oven cleaners, cleaning powders or other

abrasive cleaners. They will damage the

surface.

Painted Surfaces (on some models)

On glass cooktop models, the oven is vented

through an opening at the rear of the

cooktop.

On coil cooktop models, the oven is vented

through an opening under the right rear

surface unit.

Never cover the opening with aluminum foil or

any other material.

Oven Vent

To clean the outside glass finish, use a glass

cleaner. Rinse and polish with a dry cloth.

Glass Window (on some models)

Stainless Steel Surfaces (on some models)

Do not use a steel wool pad; it will scratch

the surface.

To clean the stainless steel surface,

use warm sudsy water or a stainless steel

cleaner or polish. Always wipe the surface

in the direction of the grain. Follow the

cleaner instructions for cleaning the

stainless steel surface.

To inquire about purchasing stainless steel

appliance cleaner or polish, or to find the

location of a dealer nearest you, please call

our toll-free number:

National Parts Center 800.626.2002

ge.com

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 51 52

Commentaires sur ces manuels

Pas de commentaire