Hotpoint JBP21 Manuel d'utilisateur télécharger pdf (Page 38)

ELECTRICAL CONNECTIONS (CONT.)

38

Installation Instructions

4-WIRE POWER CORD

INSTALLATION

WARNING:

The neutral wire of

the supply circuit must be connected to the

neutral terminal located in the lower center

of the terminal block. The power leads must

be connected to the lower left and the lower

right terminals of the terminal block. The 4th

grounding lead must be connected to the

frame of the range with the ground plate

and the ground screw.

Remove the 3 lower terminal screws from

the terminal block. Remove the ground

screw and ground plate and retain them.

Cut and discard the ground strap. DO NOT

DISCARD ANY SCREWS.

Insert the one ground screw into the power

cord ground wire terminal ring, through the

ground plate and into the frame of the range.

Insert the 3 terminal screws (removed earlier)

through each power cord terminal ring and

into the lower terminals of the terminal block.

Be certain that the center wire (white/neutral)

is connected to the center lower position of

the terminal block. Tighten screws securely

into the terminal block.

Skip to Step 8 and proceed with the installation.

E

D

C

B

A

5

3-WIRE POWER CORD

INSTALLATION

WARNING:

The neutral or ground

wire of the power cord must be connected

to the neutral terminal located in the

center of the terminal block. The power

leads must be connected to the lower left

and the lower right terminals of the

terminal block.

Remove the 3 lower terminal screws

from the terminal block. Insert the 3

terminal screws through each power cord

terminal ring and into the lower terminals

of the terminal block. Be certain that the

center wire (white/neutral) is connected

to the center lower position of the

terminal block. Tighten screws securely

into the terminal block.

DO NOT remove the ground strap

connection.

Skip to Step 8 and proceed with the

installation.

B

A

4

Ground

strap

Terminal

block

(appearance

may vary)

Neutral

terminal

Before

After

Terminal

block

Terminal

block

Neutral

terminal

Neutral

terminal

Ground strap

Ground

plate

(grounding

to range)

Ground

screw

Power cord

Ground plate

Ground strap

or

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 51 52

Commentaires sur ces manuels

Pas de commentaire