Hotpoint JBP21 Manuel d'utilisateur télécharger pdf (Page 46)

Operating

Instructions

Safety Instructions

Care and Cleaning

Installation

Instructions

Troubleshooting Tips

Consumer Support

Troubleshooting Tips

Before you call for service…

Problem Possible Causes What To Do

“Burning” or “oily” This is normal in a new oven • To speed the process, set a self-clean cycle for a

odor emitting from the and will disappear in time. minimum of 3 hours. See the Using the self-cleaning

oven vent oven section.

Strong odor An odor from the insulation • This is temporary.

around the inside of the oven

is normal for the first few times

the oven is used.

Self-Cleaning Models

Oven will not self-clean The oven temperature is too • Allow the range to cool to room temperature and

high to set a self-clean operation. reset the controls.

Oven controls improperly set. • See the Using the self-cleaning oven section.

Oven door is not in the locked • Make sure you move the door latch handle all the way to

position. the right.

Oven starts a self-clean Oven door locked during • Turn the Oven Temperature knob to OFF. Allow the

cycle when you wanted cooking. oven to cool. Never force the door latch handle.

to bake, roast or broil

“Crackling” or This is the sound of the metal • This is normal.

“popping” sound heating and cooling during both

the cooking and cleaning

functions.

Excessive smoking Excessive soil. •Press the CLEAR/OFF pad. Open the windows to rid

during a clean cycle the room of smoke. Wait until the light on the

SELF CLEAN pad goes off. Wipe up the excess soil

and reset the clean cycle.

Oven door will Oven too hot. •Allow the oven to cool below locking temperature.

not unlock

Oven not clean after a Oven controls not properly set. •See Using the self-cleaning oven section.

clean cycle

Oven was heavily soiled. •Clean up heavy spillovers before starting the clean

cycle. Heavily soiled ovens may need to self-clean

again or for a longer period of time.

Self clean light blinks The OVEN TEMP knob has not •Set the OVEN TEMP knob to CLEAN. See the Using the

when trying to set a been set to CLEAN when the self-cleaning oven section.

self clean cycle latch was moved to the right.

The latch was not moved to the •Move the latch to the right as far as it will go. See the

right when the OVEN TEMP knob Using the self-cleaning oven section.

was set to CLEAN.

Self clean light blinks A power interruption occurred. •Turn the OVEN TEMP knob to OFF and move the latch

during self clean cycle to the left as far as it will go. Reset the range controls

to the desired settings. See the Using the self-cleaning

oven section.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 52

Commentaires sur ces manuels

Pas de commentaire

Hotpoint JBP21 Manuel d'utilisateur Page 46

Commentaires sur ces manuels

Produits connexes et manuels pour Radio Hotpoint JBP21