Hotpoint RGB532 Manuel d'utilisateur télécharger pdf (Page 18)

ADJUST THE OVEN THERMOSTAT—

DO IT YOURSELF!

You may feel that your new oven cooks differently

than the one it replaced. We recommend that you

use your new oven for a few weeks to become more

familiar with it, following the times given in your

recipes as a guide.

If you think your new oven is too hot or too cold,

you can adjust the thermostat yourself. If you think

it is too hot, adjust the thermostat to make it cooler.

If you think it is too cool, adjust the thermostat to

make it hotter.

We do not recommend the use of inexpensive

thermometers, such as those found in grocery stores,

to check the temperature setting of your new oven.

These thermometers may vary 20–40 degrees.

To Adjust the Thermostat:

(appearance may vary)

Pull the OVEN CONTROL knob off the range and

look at the back side.

To make adjustment, loosen (approximately one turn),

but do not completely remove, the two screws on the

back of the knob. With the back of the knob facing

you, hold the outer edge of the knob with one hand

and turn the front of the knob with the other hand.

To raise the oven temperature, move the top screw

toward the right. You’ll hear a click for each notch

you move the knob. To lower the temperature, move

the top screw toward the left. Each click will change

the oven temperature approximately 10°F. (Range is

plus or minus 60°F. from the arrow.)

We suggest that you make the adjustment one click

from the original setting and check oven performance

before making any additional adjustments.

After the adjustment is made, retighten screws so they

are snug, but be careful not to overtighten. Re-install

knob on range and check performance.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 43 44

Pas de commentaire

Hotpoint RGB532 Manuel d'utilisateur Page 18