Hotpoint RGB532 Manuel d'utilisateur télécharger pdf (Page 38)

INSTALLATION INSTRUCTIONS

(continued)

CHECK IGNITION OF SURFACE BURNERS

Operation of all cooktop and oven burners

should be checked after the pilots have been

lighted (on some models) and range and gas

supply lines have been carefully checked for leaks.

Standing Pilot Models

Select a top burner knob and simultaneously

push in and turn to HI position. The burner

should light within a few seconds. Try each

burner in succession until all burners have

been checked.

Electric Ignition Models

Select a top burner knob and simultaneously

push in and turn to LITE position. You will hear a

snapping sound indicating proper operation of

the spark module. Once the air has been purged

from the supply lines, burners should light

within 4 seconds. After burner lights, rotate

knob out of the LITE position. Try each burner

in succession until all burners have been checked.

LIGHT THE PILOTS

(continued)

4. Turn the OVEN CONTROL knob to a setting

above 200°F. The pilot flame will increase in size

and impinge on the temperature-response element.

The oven burner will light in 30-90 seconds.

The oven burner will operate until the set

temperature is reached. The oven burner will

continue to cycle on and off as necessary to

maintain the oven at the temperature indicated

by the OVEN CONTROL knob.

Stand-by pilot flame

Heater pilot flame

Quality of Flames

The combustion quality of burner flames needs

to be determined visually.

If burner flames look like (A), call for service.

Normal burner flames should look like (B) or

(C), depending on the type of gas you use.

With LP gas, some yellow tipping on outer

cones is normal.

(A) Yellow flames—

Call for service

(B) Yellow tips on

outer cones—

Normal for LP gas

Normal for natural gas

CHECK IGNITION OF OVEN BURNER

Your oven is designed to operate quietly and

automatically. To operate the oven, turn the OVEN

CONTROL knob to a setting above 200°F. After

30-90 seconds, the oven burner will ignite and

burn until the set temperature is reached. The

oven burner will continue to cycle on and off as

necessary to maintain the oven at the temperature

indicated by the OVEN CONTROL knob.

Electric ignition models require electrical

power to operate. The oven cannot be lit during a

power outage. Gas will not flow unless the glow

bar is hot.

If the oven is in use when a power outage occurs,

the burner will shut off and cannot be re-lit until

power is restored.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 44

Commentaires sur ces manuels

Pas de commentaire

Hotpoint RGB532 Manuel d'utilisateur Page 38

Commentaires sur ces manuels

Produits connexes et manuels pour Radio Hotpoint RGB532