Hotpoint HME35 Manuel d'utilisateur télécharger pdf (Page 9)

Using the display

Setting the temperature

If the compartment concerned is switched off, the word

OFF will appear on the relative indication space on the

display (REFRIGERATOR COMPARTMENT setting and

FREEZER COMPARTMENT setting). If the compartment is

switched on, then the temperatures set at that time will

appear. To change them, turn the relative knob directly

(REFRIGERATOR OPERATION Knob and FREEZER

OPERATION and APPLIANCE ON/OFF Knob).

The refrigerator compartment can be set to between

+2°C and +8°C, while the freezer compartment can be

set to a temperature of between -18°C and -26°C. The

temperature in both cases can be increased or

decreased by 1°C at a time.

When the HOLIDAY function is enabled, temperature

regulations cannot be made, but the appliance

automatically sets itself to the best setting for the

situation: +12°C for the refrigerator compartment (if

enabled) and -18°C for the freezer compartment.

Function status

Function symbol during normal operation

Function selected (outline flashing)

Function enabled (outline on)

Enabling/disabling the functions

Press the MODE button as many times as necessary for

the red outline of the function you wish to act on to light

up: this indicates that the function has been selected

and is ready to be enabled or disabled. Now you can

enable or disable the selected function using the

SELECT button.

! If you do not confirm your selection by pressing the

button within five seconds of the last action

performed on the display, the latter shall go back to

displaying the function previously set and indicate that

no new modification has been made.

! The SUPER COOL function is linked to the refrigerator

compartment and when the latter is switched off, no action

whatsoever will be possible on the former, other functions

foresee an operation that can create conflicts (for example,

when the HOLIDAY and SUPER FREEZE functions are

enabled simultaneously), in this case a pre-set priority is

taken into consideration in order to help you operate the

appliance.

! The SUPER FREEZE function features a double mode

of operation (see paragraph on operating the freezer

compartment).

Enabling/disabling the DEMO mode:

To run a demonstration of the display operation while

keeping the appliance turned off, just enable the DEMO

mode.

Enabling:

- set the

FREEZER OPERATION and APPLIANCE ON/OFF

Knob

to 0ff;

- keep the two buttons “Select” and “Mode” pressed for

approximately 5 seconds, until you hear the buzzer and

the two words “OFF” and “OFF” flash on the display;

these words will flash for the entire duration the DEMO

mode is enabled.

Disabling:

- set the

FREEZER OPERATION and APPLIANCE ON/OFF

Knob

to 0ff;

- keep the two buttons “Select” and “Mode” pressed for

approximately 5 seconds, until you hear the buzzer and

the two words “OFF” and “OFF” on the display stop

flashing.

Using the refrigerator to its full potential

• Use the REFRIGERATOR OPERATION knob to adjust

the temperature (

see Description

• Activate the SUPER COOL function to lower the

temperature quickly. For example, when you place a

large number of new food items inside a fridge, the

internal temperature will rise slightly. The function

quickly cools the groceries by temporarily reducing the

temperature until it reaches the ideal level.

• Place only cold or lukewarm foods in the compartment,

not hot foods (

see Precautions and tips

• Remember that cooked foods do not last longer than

raw foods.

• Do not store liquids in open containers. They will

increase humidity in the refrigerator and cause

condensation to form.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 19 20

Commentaires sur ces manuels

Pas de commentaire

Hotpoint HME35 Manuel d'utilisateur Page 9

Commentaires sur ces manuels

Produits connexes et manuels pour Réfrigérateurs Hotpoint HME35