Hotpoint RLA33 Manuel d'utilisateur télécharger pdf (Page 4)

Installation

Levelling:

Level the fridge when it is in its final location by adjusting the front feet, until firm

contact is made with the floor. This will stop rocking or vibration and keep the door

aligned which helps the fridge run reliably and efficiently.

Before plugging in and switching on, leave the fridge standing in its final location for

at least 15 minutes to allow it to settle.

Fitting a Fridge under a Work Top

To minimise running costs Hotpoint recommend fitting a vent to the rear of your

worktop, which is available from Hotpoint Genuine Parts & Accessories Mail Order

Hotline (see KEY CONTACTS, back page).

WARNING: If there is less than 30mm clearance above the fridge, a vent must be

fitted to provide adequate ventilation above your fridge.

SAFETY &

INSTALLATION

Bottle Retainer:

To fit the bottle rack retainer:

Locate the retainer groove at one end of

the bottle rack and then gradually press

down along the top edge until the

retainer is fully in the home position.

1 2 3 4 5 6 7 8 9 ... 15 16

Pas de commentaire

Hotpoint RLA33 Manuel d'utilisateur Page 4