2
TEMPERATURE SETTING
Press the Temperature button on the control panel to adjust the
temperature from the warmest through the lower to the coldest level.
Pressing the Temperature button, the temperature setting will change
cyclically. At rst plug-in of appliance temperature setpoint is present
at medium position (factory setting).
Following table shows temperature setpoints:
Note: Displayed set points correspond to the average temperature
throughout the whole refrigerator.
ALARM TYPE
Door open alarm
Door open alarm
Malfunction
SIGNAL
Refrigerator Light blinks
Refrigerator Light OFF
Any temperature indicators blinks
CAUSE
The door has remained open for
more than 5 minutes.
The door has remained open for
more than 8 minutes.
Product malfunction.
CURE
Close the door
Close the door
Contact the After-sales Service
DAILY USE
FUNCTIONS
ALARM TABLE
FAST COOLING
The use of the Fast Cooling function is recommended to increase the
cooling capacity of the refrigerator compartment when placing a very
high quantity of food within it.
To activate the Fast Cooling function, press and hold for 3 seconds
the Temperature button on the control panel till all the 3 LEDs will
turn on.
The function is automatically deactivated after 24 hours and return to
previous selected set point.
The function can be manually deactivated by pressing and holding for
3 seconds the Temperature button on the control panel.
6TH SENSE
This function automatically works to ensure the optimal conditions to
preserve the stored food. The “6th Sense” function is automatically
activated when:
• a large amount of food is loaded into the refrigerator
• the refrigerator door is left open for a long time
REFRIGERATOR LIGHT
The light system inside the refrigerator compartment uses LEDs light,
allowing a better lightning as well as a very low energy consumption.
If the LED light system does not work, please contact the Service to
replace it.
Important: The refrigerator compartment light switches on when the
refrigerator door is opened. If the door is kept open for more then 8
minutes the light will be automatically switched o.
FIRST TIME USE
HOW TO START THE APPLIANCE
After plugging the appliance to the mains, it starts the operation
automatically. After starting the appliance, wait at least 4-6 hours
before placing food into the fridge and into the freezer compartment.
When the appliance is connected to the power supply, the display
lights up and all the icons appear on the display for approximately 1
second. The default (factory) values of the fridge compartment
settings light-up.
ACCESSORIES
See Use and Care Guide for more details on functions /
see last page for information on how to obtain the Use and Care Guide
HIGH TEMP.
MEDIUM TEMP.
LOW TEMP.
MED-HIGH TEMP.
MED-LOW TEMP.
FAST COOLING
EGG TRAY BOTTLE SEPARATOR ICE TRAY
Led on Led o
• a prolonged power failure takes place, causing the internal
temperature of the appliance to increase to values that cannot
guarantee safe storage of food.
(4 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels