Hotpoint HQ9 B1L Mode d'emploi télécharger pdf (Page 10)

Location Requirements

To ensure proper ventilation for your refrigerator, allow for a

1.25 cm space on each side and at the top. Allow for a 5 cm

space behind the refrigerator. If your refrigerator has an ice maker,

allow extra space at the back for the water line connections.

When installing your refrigerator next to a xed wall, leave a 9.5

cm minimum space between the refrigerator and wall to allow the

door to swing open.

NOTE: This refrigerator is intended for use in a location where

the temperature ranges from a minimum of 10°C to a maximum

of 43°C. The preferred room temperature range for optimum

performance, which reduces electricity usage and provides

superior cooling, is between 15°C and 32°C. It is recommended

that you do not install the refrigerator near a heat source, such as

an oven or radiator.

Electrical Requirements

IMPORTANT: Installation and the electrical connection must

be carried out by a qualied technician according to the

manufacturer’s instructions and in compliance with the local

safety regulations.

■ The refrigerator is designed to operate on a separate 220-240

Volt, 10 A, 50-60 Hz circuit.

■ Make sure the voltage specied on the rating plate

corresponds to that of your home.

■ It must be possible to disconnect the appliance from the

power supply by unplugging it or by means of a main two pole

switch installed upstream of the socket.

■ If the supply cord is damaged, it must be replaced by the

manufacturer, its service agent or similarly qualied persons in

order to avoid a hazard.

Before you move your refrigerator into its nal location, it is

important to make sure you have the proper electrical connection:

Recommended Earthing Method

220-240 Volt 50 Hz, 220 Volt 60 Hz, or 230/240 Volt 50 Hz AC

only 10 A fused and earthed electrical supply is required.

For Australia and New Zealand:

Your new appliance has been especially manufactured to meet all

Australian Standards and Conditions.

Some notations in the installation instructions may refer to

electrical requirements in other countries, so we draw your

particular attention to these specic notes.

Your appliance needs to be plugged into a 230/240 Volt 50 Hz

AC only 10 A earthed socket.

WARNING

Explosion Hazard

gasoline, away from refrigerator.

1,25 cm

9,5 cm

WARNING

Electrical Shock Hazard

Plug into a grounded (earthed) outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

Type I

Type E and F

Type B

Type M

Type G

21-Apr-2018 01:11:42 EDT | RELEASED

In some European factories the letter "W" of the part code mentioned herein will be automatically

replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 25 26

Commentaires sur ces manuels

Pas de commentaire

Hotpoint HQ9 B1L Mode d'emploi Page 10

Commentaires sur ces manuels

Produits connexes et manuels pour Réfrigérateurs-congélateurs côte à côte Hotpoint HQ9 B1L