Hotpoint HQ9 B1L Mode d'emploi télécharger pdf (Page 13)

Remove Refrigerator Doors

Remove Right-Hand Door

1. Unplug refrigerator or disconnect power.

2. Keep refrigerator doors closed until you are ready to lift them

free from the cabinet.

NOTE: Provide additional support for refrigerator door while

hinges are being removed. Do not depend on door gasket

magnets to hold door in place while you are working.

3. Using a Phillips screwdriver, remove cover from top hinge.

4. Using 5 mm socket wrench, remove four screws from top

hinge and set aside.

5. Lift refrigerator door from middle hinge pin. The top hinge will

come away with door.

Remove Left-Hand Door

IMPORTANT: The wiring for the UI run through left-hand door

hinge, so they must be disconnected before removing door.

1. Using a Phillips screwdriver, remove cover from top hinge.

2. Disconnect two wiring plugs located on top of door hinge.

■ Grasp each side of wiring plugs. With your left thumb,

press down to release catch and pull sections of the plugs

apart.

WARNING

Excessive Weight Hazard

Use two or more people to lift the refrigerator door.

Failure to do so can result in back or other injury.

WARNING

Electrical Shock Hazard

Disconnect power before removing doors.

Failure to do so can result in death or electrical shock.

A. Top hinge cover screw

B. Top hinge cover

C. 5 mm socket screws

D. Top hinge

A. Top hinge cover screw

B. Top hinge cover

A. Wiring Plug

B. Ground (earth) connector

21-Apr-2018 01:11:42 EDT | RELEASED

In some European factories the letter "W" of the part code mentioned herein will be automatically

replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 25 26

Pas de commentaire

Hotpoint HQ9 B1L Mode d'emploi Page 13