Hotpoint HQ9 B1L Mode d'emploi Page 16

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 26
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 15
16
Using the Controls
The touch-activated controls are located on the left hand refrigerator door. The control panel includes information about various buttons
and indicators. Refrigerator and freezer temperature indicator shows the last temperature set point.
1. Sound Indicator
2. Sound ON/OFF Button
3. Refrigerator Temperature Button (hold 3 sec for Super Cool)
4. Multi Temperature Preset Temperature Button (only for
HQ9 B1L)
5. Freezer Temp Button (hold 3 sec for Super Freeze)
6. Key Lock Indicator
7. Key Lock Button
8. Door Open Indicator
9. Super Freeze Indicator
10. Soft Freeze Indicator (only for HQ9 B1L)
11. Mild Freeze Indicator (only for HQ9 B1L)
12. Traditional Freeze Indicator (only for HQ9 B1L)
13. Super cool Indicator
14. Holiday Mode Button
15. Demo mode Indicator (only for HQ9 B1L)
16. Holiday Indicator (hold 3 sec)
The Control Panel will automatically turn off after one minute of inactivity. To turn on the control panel, press any key.
Viewing and Adjusting Temperature Set Points
Adjusting Refrigerator and Freezer Compartment
Temperature:
For your convenience, your refrigerator and freezer controls are
preset at the factory.
When you rst install your refrigerator, make sure that controls are
still set to recommended set points. The factory recommended
set points are 3°C for refrigerator and -18°C for freezer.
Pressing Refrigerator or Freezer Temperature button will toggle
through temperature set points in Celsius (°C)
IMPORTANT:
Wait 24 hours before you put food into refrigerator. If you add
food before refrigerator has cooled completely, your food may
spoil.
NOTE: Adjusting the set points to a colder-than
recommended setting will not cool the compartments any
faster.
If temperature is too warm or too cold in refrigerator or freezer,
rst check air vents to be sure they are not blocked before
adjusting controls.
The recommended settings should be correct for normal
household use. The controls are set correctly when milk or
juice is as cold as you like and when ice cream is rm.
NOTE: Areas such as a garage, basement or porch may have
higher humidity or extreme temperatures. You may need to
adjust temperature away from recommended settings to
accommodate for these conditions.
Wait at least 24 hours between adjustments. Recheck
temperatures before other adjustments are made.
Multi Temperature Setting (only for HQ9
B1L)
Multi Temperature function allows you to toggle preset
temperature for Multi Temperature compartment.
Symbol Function Temperature
Traditional freezer -18°C
Mild freezer -12°C
Soft freezer -7°C
* To activate/deactivate Coolest setting (-20°C), press Multi Temperature Preset Temperature Button
for 3 seconds. When the Coolest setting is activated, all three icons will be lit.
Adjusting Multi Temperature Setting
Traditional freezer (-18°C): Food already frozen and fresh food
(max 12 months)
Mild freezer (-12°C): Food already frozen (max 1 month)
Soft freezer (-7°C): Food already frozen (max 1 week)
When Multi Temperature Freezer is set to -18°C or -20°C,
both Multi Temperature Freezer temperature and Freezer
temperature would be cooled down to the colder setting
whichever Freezer or Flexible Freezer has.
Multi Temperature Freezer compartment temperature might
not be able to reach -7°C when the ambient temperature is
around 10°C or colder.
14
1
2
3
4
5
6
7
8
9
10
11
12
13
15
16
21-Apr-2018 01:11:42 EDT | RELEASED
In some European factories the letter "W" of the part code mentioned herein will be automatically
replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")
Vue de la page 15
1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 25 26

Commentaires sur ces manuels

Pas de commentaire