Hotpoint HQ9 B1L Mode d'emploi télécharger pdf (Page 19)

SHELVES, BINS AND DRAWERS

Shelf Height Adjustment

Shelf height can be adjusted by changing its location from bottom

support to upper support and vice versa

■ Open right side door to its full opening.

■ Open left side door to its full opening and then lift door to

open 180°.

■ Take shelf out of refrigerator and place it to desired mounting

position.

■ Ensure shelf is properly seated on shelf mounts.

Shelves and Shelf Frames

The shelves in your refrigerator are adjustable to meet your

individual storage needs.

Storing similar food items together in your refrigerator and

adjusting the shelves to t different heights of items will make

nding the exact item you want easier. It will also reduce the

amount of time the refrigerator door is open and save energy.

To remove and replace shelves:

1. Open the right side door to its full opening and left side door

to its full opening and lift left door to open 180°.

2. Remove middle shelf or top shelf by lifting it up and out

of shelf supports. Then pull shelf forward and tilt down to

a vertical position. Turn shelf at an angle and pull out of

refrigerator.

3. Remove bottom shelf by lifting it up and out of shelf supports.

Then pull shelf forward and tilt up to a vertical position. Turn

the shelf at an angle and pull out of refrigerator.

4. Replace middle and top shelves by putting shelf in refrigerator

at an angle with shelf front down. Lift front of shelf up and

slide in until the rear of shelf drops into shelf supports. Lower

front of shelf and make sure that shelf is in position.

5. Replace bottom shelf by putting shelf in the refrigerator at an

angle with shelf up. Lift front of shelf down and slide in until

rear shelf drops into shelf supports. Lower front of shelf and

make sure that shelf is in position.

Fresh Crisper

To remove and replace the Fresh Crisper:

1. Grasp handle of the Fresh Crisper and slide the Fresh Crisper

straight out to the stop. Lift the Fresh Crisper off bottom

guide.

2. Replace/putting back the Fresh Crisper by placing it on the

bottom Fresh Crisper guide and pushing it past the Fresh

Crisper stop into position.

180°

130°

Fresh Crisper

21-Apr-2018 01:11:42 EDT | RELEASED

In some European factories the letter "W" of the part code mentioned herein will be automatically

replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 25 26

Commentaires sur ces manuels

Pas de commentaire

Hotpoint HQ9 B1L Mode d'emploi Page 19

Commentaires sur ces manuels

Produits connexes et manuels pour Réfrigérateurs-congélateurs côte à côte Hotpoint HQ9 B1L