Hotpoint HQ9 B1L Mode d'emploi Page 23

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 26
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 22
23
TROUBLESHOOTING
If you experience Possible Causes Solution
Refrigerator Operation
The refrigerator will not
operate.
Check electrical supply. Plug the power cable into an earthed socket.
Do not use an extension cable.
Make sure there is power to the socket. Plug in a lamp to see if
the socket is working.
Reset a tripped circuit breaker. Replace any blown fuses.
NOTE: If problems continue, contact an electrician.
Check controls. Make sure the controls are turned on. See the “Using the
Controls” section.
New installation Allow 24 hours following installation for refrigerator to cool
completely.
NOTE: Adjusting temperature controls to the coldest setting will
not cool either compartment more quickly.
Refrigerator control is in Demo mode
(on some models).
If the refrigerator is in Demo mode, cooling is turned off and
“Demo” will be illuminated on the control panel. See the “Using
the Controls” section for more information.
The motor seems to run
too much.
High-efciency compressor and fans Larger, more efcient refrigerators run longer at lower, more
energy efcient speeds.
The room or outdoor temperature is
hot.
It is normal for refrigerator to work longer under these
conditions. For optimum performance, place refrigerator in an
indoor, temperature-controlled environment. See the “Location
Requirements” section.
A large amount of warm food has
been recently added.
Warm food will cause refrigerator to run longer until the air cools
to the desired temperature.
The door(s) are opened too frequently
or for too long.
Warm air entering refrigerator causes it to run more. Open the
door less often.
The refrigerator door or freezer drawer
is open.
Make sure refrigerator is level. See the “Refrigerator Levelling
and Door Closing” section. Keep food and containers from
blocking the door.
The refrigerator control is set too cold. Adjust refrigerator control to a less-cold setting until refrigerator
temperature is as desired.
The door or drawer gasket is dirty,
worn, or cracked.
Clean or change gasket. Leaks in the door seal will cause
refrigerator to run longer in order to maintain desired
temperatures.
First try the solutions suggested here to possibly avoid a service call.
WARNING
Electrical Shock Hazard
Plug into a grounded (earthed) outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
21-Apr-2018 01:11:42 EDT | RELEASED
In some European factories the letter "W" of the part code mentioned herein will be automatically
replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")
Vue de la page 22
1 2 ... 18 19 20 21 22 23 24 25 26

Commentaires sur ces manuels

Pas de commentaire