Hotpoint T H TNF 9322 OX Guide de l'utilisateur télécharger pdf (Page 2)

FIRST TIME USE

HOW TO START THE APPLIANCE

After plugging the appliance to the mains, it starts the

operation automatically. After starting the appliance, wait at

least 4-6 hours before placing food into the fridge and into

the freezer compartment.

When the appliance is connected to the power supply, the

display lights up and all the icons appear on the display for

approximately 1 second. The default (factory) values of the

fridge - freezer compartment settings light-up.

DAILY USE

FUNCTIONS

ON/STANDBY INDICATOR /BUTTON

To put the product in Stand-by, press and hold for 3 seconds.

All the icons turn o except.

FRIDGE TEMPERATURE

To adjust the Fridge Temperature, press the

Fridge °C

button. The Fridge Temperature can be adjusted between

+2°C and + 8°C, as shown by the Fridge Temperature LEDs.

FAST COOL

Using Fast Cool function it is possible to increase the cooling

in the refrigerator compartment. The use of this function is

recommended when placing a very high quantity of food

in the refrigerator compartment. Press & hold for 3 sec.

the Fridge °C button to activate Fast Cool function. When

activated, the Fast Cool indication will be displayed by the

Fridge Temperature LEDs as shown in the beside sequence.

The function is automatically disabled after 6 hours, or can be

manually disabled by pressing Fridge °C button.

FREEZER TEMPERATURE

To adjust the Freezer Temperature, press the

Freezer °C

button. The Freezer Temperature can be adjusted between

-16°C and -24°C, as shown by the Freezer Temperature LEDs.

FAST FREEZE

The use of this function is recommended when placing a very

high quantity of food to be frozen in the freezer compartment.

24 hours before freezing fresh food, press & hold for 3 sec.

the Freezer button to activate the Fast Freeze function. When

activated, the Fast Freeze indication will be displayed by the

Freezer Temperature LEDs as shown in beside sequence.

After 24 hours place the food to be frozen in the upper

basket of freezer compartment. The function is automatically

disabled after 48 hours, or can be manually disabled by

pressing Freezer °C button.

KEY LOCK FUNCTION

To lock/unlock the keys of the Control Panel, press the Key

Lock button for 3 seconds. The Key Lock indicator is on when

the option is engaged.

SENSOR INDICATOR

Sensor technology automatically works to ensure the optimal

conditions to preserve the stored food.

SMART DISPLAY

This optional function can be used to save energy. To activate

the Smart Display, press

Fridge °C and Freezer °C buttons

at the same time for 3 seconds until an audible signal sounds.

To deactivate this function repeat the same procedure.

Remember that this function does not disconnect the

appliance from the power supply, but only reduce the power

consumed by external display.

FOOD CARE ZONE 0°C/ SAFE DEFROST*

A compartment designed to keep delicate food such as meat

and sh fresh. The low temperature in the compartment

makes it possible to store the food for up to one week -

tests performed on meat products - without changing its

nutrients, appearance and avour.

The compartment is also very suitable for healthy food

defrosting, as low-temperature defrosting prevents any

proliferation of microorganisms, while protecting its taste

and organoleptic properties.

It is not suitable for fruit, vegetables and green salad. But it

can be used for stued fresh pasta and even cooked food or

leftovers.

TEMPERATURE INDICATOR*

Temperature indicator informs you if the temperature in this

cavity is cold enough for storage with the word “OK”.

1. Check that OK appears clearly on the indicator light (see

the picture below).

If the word “OK” does not appear it means that the

temperature is too high: set a lower temperature and wait

approximately 10 hours until the temperature has been

stabilised.

3. Check the indicator light again: if necessary, readjust it

following the initial process. If large quantities of food have

been added or if the refrigerator door has been opened

frequently, it is normal for the indicator not to show OK.

Wait at least 10 hours before adjusting the REFRIGERATOR

OPERATION knob to a higher setting.

See Use and Care Guide for more details on functions / see last

page for information on how to obtain the Use and Care Guide

1 2 3 4

Commentaires sur ces manuels

Pas de commentaire

Hotpoint T H TNF 9322 OX Guide de l'utilisateur Page 2

Commentaires sur ces manuels

Produits connexes et manuels pour Réfrigérateurs-congélateurs côte à côte Hotpoint T H TNF 9322 OX