Hotpoint RB526DHWW Manuel d'utilisation et d'entretien télécharger pdf (Page 20)

After a Self-Clean Cycle

You may notice some white ash in the oven.

Wipe it up with a damp cloth after the oven

cools.

If white spots remain, remove them with a

soap-filled steel wool pad and rinse thoroughly

with a vinegar and water mixture.

These deposits are usually a salt residue that

cannot be removed by the clean cycle.

If the oven is not clean after one clean cycle,

repeat the cycle.



You cannot set the oven for cooking until

the oven is cool enough for the door to be

unlatched.

 While the oven is self-cleaning, you

can press the Clock pad to display the time

of day. To return to the clean countdown,

press the Self Clean pad.

 Apply a small amount of vegetable oil

to a paper towel and wipe the edges of the

oven racks with the paper towel. Do not

spray with Pam

or other lubricant sprays.

To Stop a Self-Clean Cycle

Turn knob to off position and wait for self clean

light to go off.

Wait until the oven has cooled below the

locking temperature to unlatch the door. You

will not be able to open the door right away

unless the oven has cooled below the locking

temperature.

Using the self-cleaning oven.

(on some models)

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 35 36

Pas de commentaire

Hotpoint RB526DHWW Manuel d'utilisation et d'entretien Page 20