Hotpoint X153E Manuel d'utilisateur télécharger pdf (Page 36)

Care and Cleaning

Remove the rod shelves and grill pan.

Use a fine steel wool soap pad to remove stubborn stains from the

rod shelves, grill pan and the floor of the oven.

The surface of the ‘Stayclean’ oven liners are treated on the mottled face with a

special vitreous enamel which absorbs cooking soils. At temperatures of 220˚C

(425˚F) or above, the special surface enables these soils to be slowly destroyed.

The higher the temperature the more effective it is. In most cases normal

cooking operation at this temperature will permit this cleaning operation to

proceed during cooking. However if higher cooking temperatures are not used

regularly it may be necessary, to prevent heavy soiling, to run the oven without

a meat pan at maximum setting for a couple of hours. This may be necessary

once a month or once every two or three months depending on the type and

amount of oven cooking.

It should not normally be necessary to clean the ‘Stayclean’ panels in water. If

desirable remove the rod shelves and the side panels and wash them in warm

soapy water, followed by rinsing in clean water.

Open the oven door and remove the rod shelves. Using a suitable cloth to

protect the fingers grip the light glass dome, unscrew anti-clockwise and

lift. Reach into the aperture with fingers, and unscrew the lamp anti-

clockwise. Fit replacement lamp (15W 300

C rated SES), refit dome.

Ovens

Oven Liners

Oven Lamp

Replacement

WARNING: To avoid electric shocks - please ensure that the

electricity supply to the appliance is switched off and the

appliance is fully cold, before removing the lamp lens.

1 2 ... 31 32 33 34 35 36 37 38 39 40

Pas de commentaire

Hotpoint X153E Manuel d'utilisateur Page 36