Hotpoint DDP-700 Manuel d'utilisateur télécharger pdf (Page 9)

MODEL NAME

DDP-700

USER GUIDE

PAGE

Handset battery charge level

1. The Level of the battery power is indicated as a battery icon on the LCD display in the handset. If the battery

icon shows empty, your DDP-700 need to be charge.

2. When in use and your DDP-700 emit battery low warning tone, your DDP-700 need to be charge

3. When fully charge your DDP-700 will operate for eight (8) hours talk time for earpiece, one hour for the speaker

phone and 100 hours of standby time.

GETTING STARTED

On / Off function

The button when press and hold will switch on or off the power of your DDP-700 handset. When your DDP-700

is set to off, your DDP-700 will conserved the battery power, however placing and receiving a call cannot be made.

Out of range warning

If you are moving around during a call and you hear an out of range warning tone from your DDP-700 handset, thi

means you are going out of your DDP-700 base coverage. Move a little closer until the tone stops. If you do not

move, your call may be cut off. If your call will cut off, you will hear beep tone and your DDP-700 handset antenna

icon will continuously flashing.

Press , your DDP-700 handset will display BASE , flashing. You may need to go closer to the base to

establish radio link between the handset and the base.

Standby mode

When the handset is not in use, the handset is in the standby mode. The LCD will display the handset name and

number. The clock and date is also shown.

Note that, the clock and date should be set.

1. Press up to select HANDSET menu.

2. Press

3. Press to select CLOCK.

4. Press .

5. Press to select SET CLOCK.

6. Press . The 2 digits hour number are blinking.

7. Press the hour on the numeric keypad, 05= 5 AM, 17=5 PM, 23=11 PM

The clock (time and date)

Your DDP-700 handset can display the time and day. You should set it to the correct time and day at this time. For

your first setting on your DDP-700 - digital cordless phone, follow the instruction below to set the time and day.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 57 58

Pas de commentaire

Hotpoint DDP-700 Manuel d'utilisateur Page 9