Hotpoint SHL532X Manuel d'utilisateur télécharger pdf (Page 2)

Installation

Flush fitting

The oven can be installed under a work top or in a

cooking column. Figure shows the installation

dimensions. Make sure that surrounding materials are

heat resistant. Align the oven centrally with respect to

the sidewalls of the units surrounding it and fix it in

place with the screws and Allen screws provided.

See the accompanying instructions for combining

the oven with multi-functional gas or gas-electric

cookers.

Electrical connection

Before connecting the oven to the mains power

supply, make sure that:

• The supply voltage corresponds to the

specifications on the data plate on the front of the

oven.

• The mains supply has an efficient earth (ground)

connection complying with all applicable laws and

regulations. Correct earthing (grounding) is a legal

requirement. The power cable should never reach a

temperature 50°C above ambient temperature at

any point along its length. If a fixed appliance is not

provided with a power cable and plug, or some

other device permitting it to be disconnected from

the mains electricity supply, with a gap between the

contacts big enough to guarantee class III over

voltage protection, then such a device must be

fitted to the power supply incompliance with the

regulations governing electrical installations. The

socket or switch must be easily reachable with the

oven fully installed.

N.B. The manufacturer declines all responsibility for

damage or injury if the above instructions and normal

safety precautions are not respected.

IMPORTANT

The oven's data plate is accessible even with the oven

fully installed. The plate is visible simply by opening

the door. Always quote the details from it to identify

the appliance when ordering spare parts.

1 2 3 4 5 6 7 8

Pas de commentaire

Hotpoint SHL532X Manuel d'utilisateur Page 2