Hotpoint SHL532X Manuel d'utilisateur télécharger pdf (Page 6)

Care and Maintenance

Replacing the oven light

IMPORTANT:

The oven light must have these precise features:

a) it must be able to

resist high

temperatures (up to

300°C)

b) power supply: see V/

Hz indicated on data

plate.

c) power 25W.

d) E 14 connection.

Before proceeding, disconnect the appliance from the

main electricity supply.

• to prevent damage, place a tea cloth in the oven

• nscrew the glass cover of the light

• unscrew the old light bulb and replace it with the

new one

• put back the glass cover and remove the tea cloth

• connect the appliance to the main electricity supply

Removing the oven door

• Decide whether you want the door to open to the

left or right before positioning the appliance in the

oven recess.

• Fully open the door.

• Remove the four fixing screws from the door hinge.

• Remove the four plastic caps from the opposite side

and unscrew the locking pin.

• Turn the door 180°.

• Secure the door in its new position using the 4

screws removed previously.

NOTE: Make sure that the oven door is perfectly

parallel with the front panel. If it is not, adjust it by

means of the screws you have just inserted.

• Fix the oven in the oven recess using the 4 screws

and the plastic spacers provided.

• Screw in the door closing pin and secure it in

horizontal position as shown in the figure, or until it

locks in place in the case of a round pin. Fit the 4

plastic caps.

• Adjust the door closing mechanism by means of the

adjuster screws as shown in the figure.

1 2 3 4 5 6 7 8

Pas de commentaire

Hotpoint SHL532X Manuel d'utilisateur Page 6