Hotpoint IKIU 631 FLT F Mode d'emploi télécharger pdf (Page 11)

EN11

Automatic function

The function automatically sets a power level suitable for maintaining a low boil. Activate this function after bringing to the boil, pressing the corresponding zone

button first and then the button

Keep Warm

This function automatically sets a power level that keeps just-cooked food hot and serving dishes warm (with induction-suitable accessory). 

Press the key: “A” appears on the display and the indicator light turns on. To deactivate the function, simply press button.

Simmering

After bringing to the boil, press the key and the hob will automatically set the correct power level to keep the pot simmering. “A” appears on the display: the indicator light

lights up. To deactivate the function, simply press button.

Melting

This function maintains a permanently low temperature in the cooking zone. After positioning the pot/accessory on the chosen cooking zone, switch on the hob and select the

cooking zone. Press the key: “A” appears on the display and the indicator light turns on. To deactivate the function, simply press button.

Residual heat indicator.

The hob is fitted with a residual heat indicator for each cooking zone. These indicators alert the user when cooking zones are still hot.

If the display shows , the cooking zone is still hot. If the residual heat indicator of a given cooking zone is lit, that zone can be used, for example, to keep a

dish warm or to melt butter.

When the cooking zone cools down, the display goes off.

Incorrect or missing pot indicator.

If you are using a pot that is not suitable, not correctly positioned or not of the correct dimensions for your induction hob, the message “no pot” will

appear in the display (see figure at side). If no pot is detected within 60 seconds, the hob switches off.

Fast boil function (Booster)

This function, only present on some cooking zones, makes it possible to exploit the hob’s maximum power (for example to bring water to the boil very quickly).

activate the function, press the “+” button until “P” appears on the display. After 10 minutes’ use of the booster function, the appliance automatically sets the

zone

to level 9.

“Power management” (Function where it is available)

Thanks to the “Power management” function, the user can set the maximum power the hob can reach, as required.

This setting is possible at any time and is maintained until the next change.

By setting the required maximum power, the hob automatically adjusts distribution in the various cooking zones, ensuring that this limit is never exceeded; with the

advantage of also being able to manage all the zones simultaneously, but without overload problems.

4 maximum power levels are available and showed on display: 2.5 – 4.0 – 6.0 – 7.2 kW (7.2 kW is considered as max power of cooktop)

At the time of purchase, the hob is set to maximum power

After plugging the appliance into the electrical socket, in the first 60 seconds it is possible to set the required power level by running the following points:

In case of an error when setting the power, the symbol appears in the middle and an acoustic signal sounds for about 5 seconds. In this case repeat the

configuration procedure from the beginning. If the error occurs again, contact the After-Sales Service.

During normal use, if the user tries to increase the maximum available power level when reached, the level of the zone in use flashes twice and an acoustic signal

sounds.

To obtain a higher power in that zone, it is necessary to manually decrease the power level of one or more already active cooking zones.

Step Control panel Display

1 Press for approximately 

3 seconds both Power

management button (step

2 Press the Power

Management button (step

2) to confirm the previous

step

The display shows

3 Press to set the chosen level

amongst the different

options available

The light comes on together with the in-use

lights for the individual cooking zones

4 Press the Power

Management button (step

4) to confirm the previous

step

The display shows the set level which flashes

for approximately 2 seconds; after which the

hob emits an acoustic signal and then turns

itself off; it is now ready for use

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

Commentaires sur ces manuels

Pas de commentaire

Hotpoint IKIU 631 FLT F Mode d'emploi Page 11

Commentaires sur ces manuels

Produits connexes et manuels pour Non Hotpoint IKIU 631 FLT F