Hotpoint SA2 844 H IX Guide de l'utilisateur télécharger pdf (Page 3)

1. SETTING THE TIME

You will need to set the time when you switch on the

appliance for the first time: press

until the

icon and the two digits for the hour start flashing on

the display.

Use or to set the hour and press to confirm.

The two digits for the minutes will start flashing. Use

or to set the minutes and press to confirm.

Please note: When the icon is ashing, for example

following lengthy power outages, you will need to reset the

time.

2. REHEAT THE OVEN

A new oven may release odours that have been left

behind during manufacturing: this is completely

normal.

Before starting to cook food, we therefore

recommend heating the oven with it empty in order

to remove any possible odours.

Remove any protective cardboard or transparent film

from the oven and remove any accessories from inside

it.

Heat the oven to 250 °C for about one hour, preferably

using the “Maxi cooking” function. The oven must be

empty during this time.

Follow the instructions for setting the function

correctly.

Please note: It is advisable to air the room after using the

appliance for the rst time.

USING THE APPLIANCE FOR THE FIRST TIME

1. SELECT A FUNCTION

To select a function, turn the selection knob to the

symbol for the function you require: the display will

light up and an audible signal will sound.

2. ACTIVATE A FUNCTION

MANUAL

To start the function you have selected, turn the

thermostat knob to set the temperature you require.

Please note: During cooking you can change the function

by turning the selection knob or adjust the temperature by

turning the thermostat knob.

The function will not start if the thermostat knob is on 0 °C.

You can set the cooking time, cooking end time (only if you

set a cooking time) and a timer.

AUTOMATIC

To start the automatic function you have selected

(“Bread” or “Pastry”), keep the thermostat knob at the

position for automatic functions (0/A).

To finish cooking, turn the selection knob to position 0.

Please note: You can set the cooking end time and timer.

RISING

To start the “Rising” function, turn the thermostat

knob to the relevant symbol; if the oven is set to a

different temperature, the function will not start.

Please note: You can set the cooking time, cooking end time

(only if you set a cooking time) and a timer.

3. PREHEATING

Once the function starts, an audible signal and a

flashing icon

on the display indicate that the

preheating phase has been activated.

At the end of this phase, an audible signal and the

fixed icon

on the display will indicate that the oven

has reached the set temperature: at this point, place

the food inside and proceed with cooking.

Please note: Placing the food in the oven before preheating

has nished may have an adverse eect on the nal cooking

result.

. PROGRAMMING COOKING

You will need to select a function before you can start

programming cooking.

DURATION

Keep pressing until the icon and “00:00” start

flashing on the display.

Use or to set the cooking time you require, then

press

to confirm.

Activate the function by turning the thermostat knob

to the temperature you require: an audible signal will

sound and the display will indicate that cooking is

complete.

Notes: To cancel the cooking time you have set, keep

pressing until the icon starts ashing on the display,

then use to reset the cooking time to “00:00”.

This cooking time includes a preheating phase.

DAILY USE

1 2 3 4 5 6 7 8

Commentaires sur ces manuels

Pas de commentaire

Hotpoint SA2 844 H IX Guide de l'utilisateur Page 3

Commentaires sur ces manuels

Produits connexes et manuels pour Non Hotpoint SA2 844 H IX