99
en
4. Re-place the Pure Clean dust bag or dust
container correctly and close the dust
compartment lid until it clicks into place.
Replacing the Pure
Clean dust bag (G)
We recommend always using Hotpoint
original Pure Clean dust bags (on selected
models only), because their special fabric
allows optimum air ltration, maximum dust/
powder retention, high performances and a
long motor life.
As the Pure Clean dust bags (34) are made of fabric,
they are more resistant than conventional paper bags
and can retain very ne dust/powder particles more
effectively, thus ensuring maximum hygiene.
We recommend replacing the Pure Clean
bag as soon as the full-bag indicator
illuminates. The pores of a bag clogged with dust/
powder particles reduce the motor's suction
power and can cause damage.
1. Make sure the appliance is disconnected from
the electrical outlet.
2. Press the dust-compartment opening button (13)
to open the dust compartment lid (14).
3. Release the bag support (33) and remove the
Pure Clean dust bag (34).
Dispose of the dust bag in compliance with
all local regulations on waste disposal.
4. Slide a new Pure Clean dust bag into the dust
bag support completely; then place it back into
the special compartment.
5. Close the dust compartment lid until it clicks into
place.
If you are nding it difcult to close the dust
compartment lid, it is likely that the Pure
Clean dust bag and/or its dust bag support have
not been assembled correctly. Do not force the
dust bag lid to close, make sure both parts are in
the correct position to allow lid closure.
Cleaning the lters (H)
model with dust bag
The Pure Clean Hepa 13 lter ensures
maximum protection against allergens and
maintains high air quality, as the air given back
by the appliance is entirely free from dust/
powder residues (ltering power > 99.95 %).
TocleanthePureCleanHepa13lter(30):
1. Disassemble the air grill (31) using the opening
2. Press the dust-compartment opening button
(13) to open the dust compartment lid (14) and
remove the dust container (39).
3. Fit the gasket into the special groove along the
perimeter of the dust compartment (38).
4. Fitthemotorltergrill(alreadyttedtothemotor
lter)intothespecialdust-compartmentguides.
5. Slide the Pure Clean dust bag into the dust bag
support all the way; then place it into the special
dust compartment.
6. Close the dust compartment lid until it clicks into
place.
To use the vacuum cleaner with the dust
container, remember to remove all the
following parts: Pure Clean dust bag, dust bag
support, gasket, motor lter and motor lter grill.
CLEANING AND
MAINTENANCE
Before cleaning or maintaining the vacuum
cleaner, make sure it has been unplugged
from the electrical outlet. Do not use aggressive
substances or abrasive materials to clean the
appliance, its internal parts and attachments.
Make sure it is thoroughly dry before using again.
Make sure all its parts are thoroughly dry
before replacing them.
We advise you to clean the lter at least
every 4 months to restore its ltering power.
In any case we recommend replacing the lter at
least every year to ensure maximum performance.
Cleaning the appliance
Use a dry or slightly damp soft cloth to clean the
plastic parts (body, dust compartment, exible hose
etc) and the metal extension pipe (8).
Cleaning the attachments
Before cleaning the attachments refer to the chapter
“Attachments”.
Cleaning the dust compartment (F)
For the routine cleaning of the dust compartment (38):
1. Press the dust-compartment opening button (13)
to open the dust compartment lid (14).
2. Based on the model, remove the Pure Clean
dust bag (34) or the dust container (39).
3. Clean the dust compartment by removing any
residual dirt with a small brush. If needed, use a
damp soft cloth, taking care to wipe all its parts
entirely dry.
Commentaires sur ces manuels