88
en
INTRODUCTION
Thank you for purchasing our Multicyclonic
vacuum cleaner handstick. In doing so you
have opted for an effective, high performance
appliance. We advise you to register this
product on www.hotpoint.co.uk to make
sure you are entitled to all the benets made
available by Hotpoint Customer Service.
The Multicyclonic vacuum is designed combining
efciency and ergonomy. The new high efciency motors
ensure optimal performances with low consumption.
BEFORE FIRST USE
Assembling (A, B)
1. Place the motorized brush (1) on the ground
according to the direction in the gure, and t it
by clipping it on the lower part of the main body
(5). Note the voltage indicated on the back of the
brush connector (2) is the same voltage indicated
on the back of the main body. Note to remove the
motorized brush, press the brush release button
(30) on the back and remove the main body
vertically according to the gure (A).
2. To remove the dustbin assembly (7), press the
dustbin release button (6) and pull out it.
3. Keeping the dustbin handle (8), t the dustbin
assembly in position until it clicks according to the
gure (A).
4. Fit the hose handle (19) into the main body until it
clicks into place (B). To remove the handle, press
the handle release button (31) and pull it out.
5. Fasten the plastic exible hose (25) to the
suction inlet (29) until it clicks into place, same
as the picture B. To remove it, press the plastic
exible hose release (26) and pull it out. Place
the plastic exible hose on the clamp (17).
6. Place the two-in-one accessory (24) in the
handle slide clamp (18), same as in the picture.
USING THE VACUUM CLEANER
Do not use the vacuum cleaner without lters or dust
container, as the appliance could get damaged.
1. We suggest to unwind the entire power cord
before starting the appliance. Unwind and wind
the power cord (23) rotating the wind hook (21,
22) by 180 degrees and plug the appliance into
an electrical outlet (220/240V), same as the
picture C.
2. Place the suction selector on the brush position
(28) in the back main body (D).
3. Press start/stop button (32), and to start the
appliance press the electronic power regulator
(33).
4. The suction power is set on medium intensity
by default, to select the desired suction intensity
manually push the electronic power regulator (33)
on the main body.
We suggest to use a low suction power on delicate
surfaces such as curtains, fabrics, cushions etc to
avoid any damage. To pause and to switch off the
vacuum cleaner, press the start/stop button (32) again.
DESCRIPTION OF THE VACUUM
CLEANER
1. Motorized brush*
2. Motorized brush connector*
3. Brush roll cover*
4. Ultraviolet light*
5. Main body
6. Dustbin release button
7. Dustbin assembly
8. Dustbin handle
9. Filter cover
10. Hepa lter
11. Motor cover
12. Upper multicyclone
13. Multicyclonic lter
14. Lower multicyclone
15. Dustbin container
16. Dustbin lid
17. Clamp
18. Handle slide clamp
19. Hose handle
20. Handle grip
21. Winding hook*
22. Winding hook*
23. Power cord *
24. Two-in-one accessory*
(Precision nozzle/Nozzle for delicate surfaces)
25. Plastic exible hose
26. Plastic exible hose release
27. Suction selector on the accessory position*
28. Suction selector on the brush position*
29. Suction inlet
30. Brush release button
31. Handle release button
32. Start/Stop button
33. Electronic power regulator*
34. Additional roll for deep cleaning*
* on some models only
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels